- ページ 22

オール・イン・ワン・プリンター Canon PIXMA MX700 SeriesのPDF ネットワーク設定マニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MX700 Series 32 ページ。 Office all-in-one printer
Canon PIXMA MX700 Series にも：クリーニング・マニュアル (7 ページ), 補足マニュアル (6 ページ), セットアップ方法 (2 ページ), パンフレット＆スペック (2 ページ), 技術情報 (2 ページ), サービスマニュアル (44 ページ)

When the Check Wired LAN Connection

dialog box appears, remove the LAN

connector cap, connect the machine to the

network devices such as hubs with a LAN

cable, then click Yes.

(A) Wired LAN connector

Note

The connection may vary depending on your network

environment.

Confirm that the setup program detects the

machine automatically.

The machine connected with the USB cable is

detected automatically via LAN connection.

Note

If the machine was not detected, the Set Printer IP

Address dialog box appears. Make sure of the

following, then click Connect.

The network devices such as hubs or routers are

turned on, and the machine and the computer are

connected to the network.

The machine is connected to the computer with the

USB cable.

The IP address to be set for the machine is

displayed on the Set Printer IP Address dialog

box. If it is different from the address you want to

set for the machine, enter the desired IP address

on the Set Printer IP Address dialog box.

(If the machine is turned off, the Set Printer IP

Address dialog box does not appear.)

If it still fails, see "The Set Printer IP Address dialog

box is displayed during setup" on page 29.

When the Setup Completion dialog box

appears, remove the USB cable, then click

OK.

The network connection between the machine and

the computer is now successfully established.

The Printer Setup Utility (Print Center in Mac OS X

v.10.2.8) and Canon IJ Network Scanner Selector

will start up.

(A)