- ページ 7

オール・イン・ワン・プリンター Canon PIXMA MX860 seriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MX860 series 20 ページ。 Setting up in default mode (tel priority mode) without an answering machine dsl/cable modem connection
Canon PIXMA MX860 series にも：はじめに (38 ページ), 補足マニュアル (6 ページ), トラブルシューティングマニュアル (22 ページ), マニュアル (10 ページ), ネットワーク・マニュアル (9 ページ), マニュアル (8 ページ), 仕様 (2 ページ), セットアップマニュアル (17 ページ), マニュアル (18 ページ), セッティング (27 ページ)

Preparing to Connect My Multifunction

To My Network

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

• Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

• Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password is required to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

<< Previous

Next >>