- ページ 3

水ポンプ Astralpool BX SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Astralpool BX Series 15 ページ。
Astralpool BX Series にも: 据付・取扱説明書 (12 ページ)

Astralpool BX Series オーナーズマニュアル

SECTION 2. INSTALLATION

Proper ventilation is required for the pump to operate normally. Provide access for future service by leaving a clear
area around the pump. Allow plenty of space above the pump to remove the lid and basket for cleaning.
Replacement of an Existing Pump:
BX and CTX pumps can easily replace several other pumps including, Pentair® WhisperFlo® and Sta-Rite Max E Pro®. To
replace the Pentair® WhisperFlo®, or Max E Pro®, use the BX or CTX universal base. The base increases the total height
of the pump and the height of the suction side of the pump. (WhisperFlo® and Sta-Rite Max E Pro® are registered
trademarks of Pentair® Water Pool and Spa, Inc.) See Figure 2.
Installation of Astral BTX-CTX Pump Base (See Figs 3a-3c):
1. The base easily mates up to the BTX or CTX pump.
a. Select the correct side of pump base for desired pump inlet elevation, without base the pump inlet
centerline (fig 3a) is 8.465 in. The base additionally allows for a 9.125 or 10.75 inch pump inlet centerline
to ground clearance --which allows easy retrofits from popular competitor pump products.
b. Align pump foot over mating features on adjustable base after selecting correct base side (from step 1a)
which allows for closely matching existing pump installation's inlet centerline.
c. Apply moderate down pressure to pump foot to snap pump into base clips, locking it in place.
(Figure 2) BTX-CTX HEIGHT ADJUSTABLE BASE
(Figure 3a) Pump shown without adjustable base
3