- ページ 13

デスクトップ Acer AcerPower 2100のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Acer AcerPower 2100 20 ページ。 Acer acerpower 2100: user guide
Acer AcerPower 2100 にも：ユーザーマニュアル (15 ページ)

ページを印刷する

1.4

Turning On Your Computer

After you have connected all peripherals and cables, follow these steps to turn on

your computer:

1. Turn on all peripherals connected to the system such as the monitor, printer,

fax, speakers, etc.

2. Press the power button located on the front of the system unit.

When the system finishes booting, the computer is ready for use.

1.5

Turning Off Your Computer

1. Turn off all peripherals connected to the system such as the monitor, printer,

fax, speakers, etc.

2. Press the power button located on the front of the system unit for at least four

seconds. Quickly pressing the button puts the system in Suspend mode only.

3. Unplug the system if you are going to do any of the following:

not use the system for a long period of time

open the system

install system component(s)

Opening and installing components without

unplugging the system may result in serious

damage both to the system and the component.

Unplugging the system ensures that there is no

standby current on the system board. Not doing

so may damage your system.

Chapter 1 - Getting Started 1-13