- ページ 9
バーコードリーダー Cognex DataMan 700 seriesのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Cognex DataMan 700 series 14 ページ。 Id readers
ページを印刷する
Use the Setup Tool General Toolbar
Each reader can store its current set of run-time parameters to a configuration
(.cfg) file, which contains information such as the enabled symbologies and
how any output data should be formatted.
The same configuration file can be loaded onto multiple readers, as the file
does not contain identification information such as the device name of the
reader used to create it.
A reader can also generate a Cognex device configuration (.cdc) file, which
stores the set of run-time parameters plus any identification data, such as the
name of the device, trigger type, and so on. Cognex recommends generating a
device configuration file for each reader to allow you to restore a reader to its
operating state with minimal effort.
Use the File menu of the Setup Tool to manage .cfg and .cdc files:
File Menu
Open Configuration
Open a saved .cfg configuration file.
Save Configuration
Create a .cfg configuration file of current run-
time parameters.
Print Configuration Code
Not supported on the DataMan 200.
Restore Device
Load a saved device configuration .cdc file,
with run-time parameters plus device-specific
information for a particular DataMan 200.
Backup Device
Create a device configuration .cdc file for a
specific reader.
Load Image
Load an 8-bit uncompressed grey-scale .bmp or
.jpg image for analysis.
16 DataMan 700 Series Quick Reference Guide
Save Image
Save the latest acquired image with the
.jpg or .bmp file format.
Use the Edit menu for standard Cut, Copy and Paste operations.
Use the View menu to view reader information (serial number, firmware
version, and so on) and to enable and disable various elements of the
Setup Tool, and the Tasks menu to switch between various Setup Tool
options.
Use the System menu to manage the current settings on the reader
and to upgrade the features it currently supports:
System Menu
Save Settings
Save the current parameters to non-volatile
memory, which allows the reader to restore
these settings each time you reboot it.
Reset Configuration
Reset all configuration parameters in RAM
(volatile memory) to the default settings.
Update Firmware
Update the reader software.
Upload Feature Key
Unlock additional features available in the
reader software if you have the right key.
VeriCode License
Add VeriCode decoding by entering a license
string provided by Veritek. Ask your Cognex
sales representative for details.
Use the Help menu to display Setup Tool version information.
DataMan 700 Series Quick Reference Guide 17