- ページ 6

産業機器 Doosan HM 630のPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Doosan HM 630 14 ページ。

HM 500/630/800

※Conditions of Manual Tool Change 1 Cycle

① ATC Door Open

② Both Y and Z axes have completed changing the ATC positions (Y-axis and Z-axis 2nd

reference points) as well as the spindle orientation.

☞ This will be ignored if alarm AL2067 has occurred.

③ Switch the mode selection switch on the ATC manual OP to "MA NUAL".

④ Waiting Pot Spindle Side (X10.0)

⑤ ATC Main Changer Home Position (X10.3)

7) Turn the switch to "DOOR CLOSE" and press the

START button to close the door.

8) Select SYSTEM > PMC > PMC DATA > G.DATA, and check the tool number (D450) in the

spindle as well as the tool number (D452) in the waiting pot. Make correction if necessary.

D450 : Tool number in the spindle

D452 : Tool number in the waiting pot

9) When each axis returns to their respective home position, ATC troubleshooting will be

completed.

HM3digitATCE26