- ページ 11
デジタルカメラ Cognex CAM-CIC-3100-3-GC1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cognex CAM-CIC-3100-3-GC1 16 ページ。 Gige large area scan industrial camera
ページを印刷する
2.2.1 Network Interface
Network interface, RJ45 Ethernet port, three-speed Ethernet 10M / 100M / 1000Mbps transmission
interface for camera control, data transmission.
It is best to use shielded twisted-pair Category 6 cable in order to ensure the transmission quality, as
well as to prevent too much data retransmission and packet loss phenomenon.
2.2.2 12pin Power and I/O Interface
Sheet 2-1 lists the pin signal definition of the I/O interface.
Pin
1
2
3
4
5
6
7
8
9
10
11
12
2.3
Electrical Specification
2.3.1 Power Supply and Network Port Electrical Specifications
Parameter
Power
specification
EMS Standard
Sheet 2-1 Pin Signal Definition
Signal
Description
-
Camera power ground and RS232 signal ground
-
+9VDC ~ +24 VDC camera power supply
RXD RS232
Serial port receive
TXD RS232
Serial port transmit
Line3
Opto-isolated input
Line4
Opto-isolated input
Line5
Opto-isolated input
OPT_IN_GND
Opto-isolated input ground,not to connect to the power GND
Line0
Opto-isolated output
Line1
Opto-isolated output
Line2
Opto-isolated output
OPT_OUT_GND
Opto-isolated output ground,not to connect to the power GND
Sheet 2-2 Power Supply and Network Port Electrical Specifications
Description
+9 VDC to +24 VDC, <1% ripple, power supply by the Hirose 12-pin connector of the
camera*; 26 AWG cables or better.
ESD (GBT17626.2/IEC61000-4-2):
Metal housing contact 6 kV
11