ページを印刷するEN
- If you have previously used another mode (Bluetooth mode, FM radio mode, Line in), press
[MODE] (6) to select the MP3 mode (in Music mode).
- Press [
] (8) if you wish to turn on the Pause mode - playback will be stopped.
- If you press the button [
- Selecting the next or previous track:
Briefly press [
Briefly press [
3. After listening to recordings, press [
4. Turn the device off by moving the main switch OFF/ON to position OFF.
5. Remove the USB flash memory.
Choosing repetition/recording mode
By pressing the key [REPEAT] (4) you can select one of the following modes:
Press the [REPEAT] button and hold it for 2 seconds (one sound signal): repeat one track.
Press the [REPEAT] button twice (two sound signals): play all tracks.
Playback of the analogue signal from external source:
1. Put in the cable plug found in the set in the 3.5mm jack AUX IN (12), put the other cable
plug in the source (for example, smartphone, tablet PC, MP3/MP4 player, etc.) LINE OUT or
earphone jack.
2. Switch on the device and with the button [MODE] (6) choose the mode "Line in".
3. Adjust volume.
Bluetooth wireless connection:
NOTES:
• Bluetooth is a technology that uses radio waves to wirelessly connect devices located
within a close range of each other.
• Since there are many different manufacturers, models and software versions, complete
functionality cannot be guaranteed.
Device pairing
a. Make sure that the Bluetooth function is activated on your mobile device (e.g.
smartphone).
To do this, refer to your mobile device's manual.
b. Turn on the device by using the OFF/ON switch (17).
c. Press the [MODE] button (6). Turn on Bluetooth mode.
Sound system is now attempting to connect to the device with which it was previously
paired. If sound system finds the paired device, a signal will sound. If the paired device is
not found, sound system is ready to be paired with another device.
d. Find the Bluetooth menu on your mobile device and register the device on your mobile
device. To do this, refer to your mobile device's manual. Information should appear on your
mobile device's display regarding the paired device (BT ID) with the name "DOPING_S7".
e. If password is requested, enter "0000" (or another depending on the model or software
version of you mobile device).
INFO: Use the mobile device's controls to select the piece and play mode and set the start
volume (see the mobile device's user manual). You can adjust the volume with the volume
regulator of the sound system (1).
] (8) again, playback will be resumed from where it was stopped.
] (9).
] (7).
] (8).
- 3 -
3510005