- ページ 25

デスクトップ Acer AcerPower SVのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Acer AcerPower SV 30 ページ。 Acer desktop computer user's manual
Acer AcerPower SV にも： (ユーザーガイド (30 ページ)

ページを印刷する

Troubleshooting

The following questions are possible situations that may arise during

the use of your computer and each is followed by simple answers and

solutions to the situation.

Q: I pressed the power switch but the system did not boot up.

A: Check the LED located above the power switch.

If the LED is not lit, no power is being applied to the system. Do any of

the following:

•

Check if the voltage selector switch located on the rear panel of

the computer is set to the correct voltage.

•

Check if you properly plugged the power cable into an electrical

outlet.

•

If you are using a power strip or AVR, make sure that it is plugged

in and turned on.

If the LED is lit, check the following:

•

Is a non bootable (non system) diskette in the floppy drive? If yes,

remove or replace it with a system diskette and press Ctrl + Alt +

Del to restart your computer.

•

The operating system files may be damaged or missing. Insert the

startup disk you created during Windows setup into the floppy

drive and press Ctrl + Alt + Del

automatically diagnose your system and make necessary fixes.

However, if the diagnostic utility still reports a problem, then you

may have to perform the recovery process to restore your system

to its original factory default settings.

Q: Nothing appears on the screen.

A: Your computer's power management function automatically blanks

the screen to save power. Press any key to turn the display back on.

If pressing a key does not work, your computer. If restarting your

computer does not work, contact your dealer or the technical support

center for assistance.

Ctrl + Alt + Del to restart your computer. This will

Ctrl + Alt + Del