- ページ 11

スキャナー Canon CR-50のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Canon CR-50 21 ページ。 Check scanner
Canon CR-50 にも：パンフレット＆スペック (26 ページ), 取扱説明書 (24 ページ), ユーザーマニュアル (14 ページ)

ページを印刷する

Preparation Before Use

This chapter describes how to prepare the scanner to scan

documents.

Setting Up the Scanner

Perform the following steps to set up the CR-50/80. Refer to the

section for each step for details about that step.

Check your operating environment. (See "Checking Your

Operating Environment" on p. 12.)

Install the software. (See "Installing the Scanning Utility"

on p. 12.)

Install the Scanning Utility provided with the CR-50/80.

Connect the scanner to a computer. (See "Connecting the

Scanner to a Computer" on p. 13.)

Turn ON the power. (See "Turning ON the Power" on

p. 14.)

Automatically installing the device driver. (See p. 15.)

The device driver is installed automatically when Windows

recognizes the CR-50/80.

IMPORTANT

• To have the device drivers installed automatically when the

computer recognizes the CR-50/80, the software needs to be

installed before the CR-50/80 is connected to the computer.

• If you connect the computer and turn ON the CR-50/80 before

installing the software, the following wizard screen appears. If this

happens, click [Cancel], turn OFF the CR-50/80, and then install the

software.

The following wizard screen is an example in Windows 7. When a

similar wizard screen appears in Windows XP/Vista, click [Cancel].

Wizard Screen (Windows 7)