- ページ 11

体重計 Doran DS7040 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Doran DS7040 Series 13 ページ。 Waist high handrail scale

Weighing a Patient

1. Turn on the indicator by pressing the Zero button.

2. The indicator will perform a startup zero.

3. The indicator will momentarily display dashes, "-----", followed by 0.0.

4. Patient stands on the scale platform. NOTE: The handrails and indicator

tower can be grasped during weighing.

5. The display will scroll dashes until the patient's weight is captured.

6. The indicator will beep (when enabled) and then hold the weight on the

display until the scale shuts off.

1. Place item to be zeroed on the scale platform.

2. Press Zero. The scale will display a zero weight. If the item is removed, the

stable negative weight will be automatically zeroed out after 3 seconds.

3. Step onto the scale platform and the patient's weight, less the item's weight,

will be displayed.

4. To reset the scale weight to zero, Press Zero again with the scale platform

empty.

1. With Hold weight displayed, press BMI button to enter the height value. Height

entry starts at 5: 6.0 or 168.0 in representing 5 foot 6 inches or 168 centimeters.

NOTE: Height units can be changed by pressing the Units button.

2. Press the ▲ button to increase or the ▼ button to decrease the value. When

the correct value is displayed, press the BMI button to enter the value and exit.

NOTE: A menu timer will exit out of this entry mode if no buttons are pressed

within a 30 second time period.

1. With the patient standing on the scale platform, press Reweigh to reinitiate the

weighing process.

2. The display will scroll dashes until the patient's weight is captured.

3. The indicator will beep (when enabled) and hold the weight on the display until

the scale shuts off automatically.