ページを印刷する
Thank you for purchasing a Doran Scales Model 2200 or 2200B Digital Scale Indicator.
This scale uses state of the art technology to provide you with a low cost solution to the
most demanding weighing applications. With ease of use and setup in mind, the scale is
simple to set up and ready to use.
Please be sure to read the entire manual to ensure you obtain all the benefits that the
Model 2200 can provide. If any questions arise, please feel free to contact the Doran
Scales Technical Support Department at 1-800-262-6844.
The 2200 and 2200B both offer many features. A few of these features are listed below:
NTEP certification for Class III installations to 10,000d (CoC #06-101)
Display Resolution from 250 to 50,000 divisions
A six digit, 0.56" red LED display for easy reading
Eight output status LEDs
Eight on board open collector outputs
lb, kg, oz, g, lb-oz display units supported
Two configurable duplex serial ports with RS232 support
nonvolatile data storage of all calibration and setup information
Microprocessor monitoring system to prevent scale failure under severe fault
conditions
Support for up to four 350 ohm load cells
115 VAC 50/60 Hz operation standard or 230 VAC 50/60 Hz operation (Optional)
Field selectable digital filtering
Software configurable remote push-button support
Password protected, Front Panel Calibration Access Feature
Battery Operation, internal rechargeable battery provides 60 hours of continuous use
with built in charger (Optional)
4-20mA analog output (Optional)
Wired Ethernet (Optional)
Wireless Ethernet (Optional)
Modbus/TCP (Optional)
RS485 (Optional)
USB (Optional)
Four Internal Mechanical or Solid State Relay outputs (Optional)
Eight External Relay outputs for non-battery models (Optional)
Fiber Optic Communication (Optional)
For a complete list of options, please contact your local Doran Distributor
Introduction
4