- ページ 3

ヘッドセット Astro Gaming 939-001514のPDF よくある質問をオンラインで閲覧またはダウンロードできます。Astro Gaming 939-001514 9 ページ。

3. Put your MixAmp Pro Into PC Mode. To do this, hold down the power button on the

MixAmp TR for 3-5 seconds. You will see the power buttons LED light illuminate

from red to white.

4. Next, Right click the speaker icon in your task bar and select "Playback devices":

If your computer features an optical output, locate the digital optical output and set

•

this as your default device. Right click the device and navigate to Properties >

Supported formats. Ensure that Dolby Digital Live is enabled and DTS is disabled, if

featured, and that the sampling frequency is set at 48.0 kHz.

If your computer does not feature an optical output and you're using only the USB

•

cable to connect, locate the ASTRO MixAmp Pro and set as default device.

6. Connect your A40's to your MixAmp TR by plugging the Inline mute cable into the

headset, and the other end of the cable into the port on the MixAmp TR with the

headset icon. You are now ready to use your A40 TR System on your Computer.

How to set up your A40 TR on your PS4.

youtube.com/watch?v=FZkzqoFc7XM&t

Required components:

A40 TR Headset

•

MixAmp TR

•

USB Power Cable, Optical Cable, and A40 Inline Mute Cable

•

1. First, ensure the MixAmp TR has the most recent Software installed

here:

astrogaming.com/firmware/firmware.html

to the USB Port on your PC in order to update it on your PC through the ASTRO

Command Center. (Video Pending)

2. Connect the MixAmp TR to your PS4. Insert the MixAmp TR USB Power cable to the

front USB Port and connect the Optical cable to the MixAmp TR USB port and PS4

optical connection located on the rear. (Video Pending)

3. Next turn on your PS4 and wait for it to load to the home screen.

4. Go into the "Settings" tab on your top bar of your PS4 home screen. Go to -->"Settings" --

>"Sound and Screen"--> "Audio Output Settings"-->"Primary Output Port"-->"Digital

Out(optical)"--> then check Dolby Digital 5.1 ch then hit OK.

Under the "Audio Output Settings" menu select "Output to Headphones" and make

sure "Chat Audio" is selected and not "All Audio".

Also under the "Audio Output Settings" menu select "Audio Format (priority)"

and make sure "Bitstream (Dolby)" is selected and not "Linear PCM"

6. Connect your A40's to your MixAmp TR by plugging the Inline mute cable into the headset,

and the other end of the cable into the port on the MixAmp TR with the headset icon. (Video

Pending). You are now ready to use your A40 TR System on the PS4.

Ensure the MixAmp TR is connected