- ページ 18

スキャナー Canon ImageCLASS MF4270のPDF スターターマニュアルをオンラインで閲覧またはダウンロードできます。Canon ImageCLASS MF4270 36 ページ。 Canon all in one printer user manual
Canon ImageCLASS MF4270 にも：スターターマニュアル (38 ページ)

ページを印刷する

Set the Machine for Receiving Faxes

Select the Receive Mode that Suits Your Needs

The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode

which is most suitable for you from the chart below. For details, see "About the Receiving Modes, " on p. 17.

Receive fax call only

(NO voice call)

YES

–

The remote reception function is useful when the receive mode is set to <MANUAL> and connected to an external telephone. You

can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default setting is 25). For

details, see Chapter 4, "Sending and receiving" in the Reference Guide.

–

Your telephone with built-in answering machine or answering machine must be connected directly to the machine for <AnsMode>

to work. (See "Connect Telephone Cables, " on p. 12.)

–

The external telephone must be connected to the machine for <FAX/TEL> or <MANUAL> to work. (See "Connect Telephone Cables, "

on p. 12.)

–

By default, <FaxOnly> is selected in <1 RX MODE>. If external telephone is connected to the machine and receives a fax or voice call,

the external telephone rings. You can answer the voice call while the external telephone is ringing.

For incoming ring to be disabled, press [Additional Functions] → <6 FAX SETTINGS> → <4 RX SETTINGS> → <3 INCOMING RING> then

select <OFF>.

–

Voice mail is not supported with <AnsMode>.

–

DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive ring patterns to a single

telephone line, allowing you to have both a fax number(s) and a telephone number(s) using only one telephone line. Your fax will

automatically monitor incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Set the fax ring

pattern that matches the pattern assigned by your telephone company. Contact your telephone company for availability.

Set the Receive Mode

Press [Additional Functions].

Press [

] or [

] to select <6 FAX

SETTINGS>, then press [OK].

Press [

] or [

] to select <1 RX MODE>,

then press [OK].

Press [

] or [

] to select the receive mode,

then press [OK].

Receive voice call by telephone

with built-in answering machine

YES

Receive fax and/or voice call by picking

up telephone or pressing hook button

YES

Press [Stop/Reset] to return to the standby

mode.

The LCD display turned off:

●

The machine may enter the sleep mode while you are

setting up the machine. Press [Energy Saver] to turn the

machine back on and continue the setup.