ツール Astro Pneumatic Tool 78834のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Astro Pneumatic Tool 78834 4 ページ。 Last chance impact rated hub removal bolt kit

ページを印刷する

Model:

78834

WARNING

Study, understand and follow all instructions provided

with this product. Read these instructions carefully

before installing, operating, servicing or repairing this

tool. Keep these instructions in a safe accessible place.

INTENDED USE OF THE TOOL

The 78834 Hub Removal Bolt Kit is designed to press

against knuckles to budge wheel hubs free for removal.

Do not use this tool outside of the designed intent.

Never modify the tool for any other purpose or use.

WARNING

Caution: To help prevent personal injury

• Use of this product can expose you to chemicals

such as phthalates which are known to the State

of California to cause cancer, and birth defects or

other reproductive harm. For more information go

to www.P65Warnings.ca.gov/product.

Always wear ANSI approved safety equipment,

safety glasses and clothing when using this

product. Study, understand, and follow all

instructions provided with this product. Failure to

read and follow all warnings and operating

instructions may result in damages and serious

injury or death.

• Always wear ANSI approved goggles when using

this product. (Users and By standers).

• Never use this tool for any application other than for

which it was designed.

• Only use accessories designed for this tool.

• Never alter or modify this tool in any way.

• Improper operation and/or maintenance of the tool,

modification of the tool, or use of the tool with

accessories not designed for it could result in

serious injury or death.

• Always select the correct accessories of the correct

size and design for the job that you are attempting to

perform.

• Always work in a clean, safe, well-lit, organized and

adequately equipped area.

• Do not begin repairs without assurance that vehicle

is in secure position, and will not move during repair.

BEFORE USE

When unpacking, check the parts diagram and part

number listing on page 2 to make sure all parts are

included. If any parts are missing or damaged,

please call your distributor.

DO NOT DISCARD – GIVE TO USER

Product Type:

"LAST CHANCE" IMPACT RATED

HUB REMOVAL BOLT KIT

1 YEAR LIMITED WARRANTY

• Astro Pneumatic Tool Co. warrants our products to the original user

against defective material or workmanship for a period of 1 year

(except where noted on our price schedule) from the date of 1st use.

Astro reserves the right to determine whether the product failed

because of defective material, workmanship or other causes and to

charge back for missing parts. Astro Pneumatic Tool Co., at its

discretion, will repair products covered under this warranty free of

charge. The distributor should direct the original user to return the

product (with the exceptions listed below) with the distributor's

name, address, adequate proof of date of purchase or a copy of

warranty card, and a short note explaining the problem. Failures

caused by accident, alteration, or misuse are not covered by

this warranty.

• If one part of this product fails, please do not return the entire

product. Astro will replace free of charge component parts of

this product that fail within 1 year of first use by the original

user. Items included in this category include but are not limited

to kits, hand tool kits and any other product where there are

multiple items or components that make up the unit. Please

contact the phone number below in order to obtain the

replacement components covered under warranty.

• Astro Pneumatic Tool Co. or its authorized service representatives

must perform all warranty repairs. Any repair to the product by

unauthorized service representatives voids this warranty. The rights

under this warranty are limited to the original user and may not be

transferred to subsequent owners.

• This warranty is in lieu of all other warranties, expressed or implied,

including warranties of merchantability and fitness for a particular

purpose. Some states do not allow the exclusion of limitations of

incidental or consequential damages so the above limitations may

not apply to you.

PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING

1-800-221-9705 FOR INSTRUCTIONS

PRODUCT INFORMATION

• For press-in, bolt-in or otherwise corroded hubs that

should have come out with your 1st attempt but

refuse to be removed

• Simply use these impact rated bolts and nuts to

push against the knuckle assembly and

force the hub off

• Custom press bolts feature a ball bearing end and

work with included press feet to freely angle

against uneven surfaces

Page 1