- ページ 18

アクセサリー Coiltek CS-5000 V2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Coiltek CS-5000 V2 20 ページ。

Software and Sensitivity

Setting Up Your Unit with a PC

The new CB-5501M mainboard has a USB connector for connection and programming the control via

PC. The actual connection is RS-232 with USB emulation. As such, a driver is included with the

downloadable software CSWin32. Upon connection with the control, Windows will recognize a new

device. It will query for a driver. Choose to manually select the driver and use the mchpcdc.cat driver

downloaded. A new version of our software, CSWin64, is under development. When available it will

be posted in the downloads section of coiltek.com.

Adjusting Unit Sensitivity

You can adjust the sensitivity of your unit by turning the dial of the sensitivity potentiometer on the

range card clockwise to increase sensitivity and counterclockwise to lessen. A 5 degree turn is all that

is necessary for most applications.

The CB-5101R-1 shown above is obsolete. However, many are still in operation. The same caveat

applies to the choke and transformer on the new CB-5101R-2.