コントローラー Ametek Gemco 1996 Ram-SetのPDF インストレーション＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Ametek Gemco 1996 Ram-Set 20 ページ。 Automatic press shut height controller
ページを印刷する
MIXERS
The CAM2 is a 5-input mixer/pre-amplifier suitable for a wide variety of applications, particularly for expanding the number
of inputs on Bogen or other public address amplifiers. The CAM2 provides four professional, low-impedance, balanced microphone
inputs through XLR connectors and one auxiliary input.
Individual phantom power switches for each input allow the use of both dynamic and condenser microphones on the
same unit. A bridging input permits simple interconnection of multiple CAM2 mixers for system expansion without the need
to sacrifice any mixer inputs. Clipping indicators for each input and an output level meter provide information to the system
operator about sound integrity. Wide frequency response, low distortion, low noise, and high channel crosstalk isolation ensure
superior sound quality. The CAM2's balanced mixer output can be switched between line-level (+4 dBµ) or microphone-
level (-50 dBµ) for compatibility with a wide range of sound processing equipment.
P r o d u c t F e a t u r e s :
•
4 Microphone inputs
•
Low-impedance, balanced MIC inputs
•
1 High-impedance AUX input
•
Low-noise, active mixing
•
Master volume control
•
Input clipping indicator for each channel
•
5-Segment LED output level meter
•
XLR microphone input connectors
•
Phantom power selectable per MIC input
•
Unbalanced line-level output
•
Balanced XLR output
Output Level Switch
Switch changes the nominal
signal level of the XLR output
from +4 dBµ to -50 dBµ.
Rear Panel
Output XLR Connector
Provides a balanced output
compatible with most
professional equipment.
CAM MIXERS SELECTION CHART
Inputs
Phantom
Model
Power/
Voltage
CAM8PRO
8
30V DC
5
CAM2
12V DC
(4 MIC,
1 AUX)
50
•
Illuminated power switch
•
Switchable output level (+4/-50 dBµ)
•
Compact size
•
Bridging input for connecting together
multiple CAM2 mixers
•
Rack- or wall-mounted with RPK35B
or WMK1
•
Listed to UL Standard 60065 for US & Canada
11-3/8" W x 2-5/8" H x 7-3/8" D
-
Bridging
-
The bridging jacks facilitate the connecting to-
gether of mixers to obtain additional inputs
without using any of the CAM2's inputs.
Line Output Connector (Line Out)
-
RCA jack provides unbalanced output signal
compatible with most amplifiers, recording
equipment, and other audio equipment.
Not affected by Output Level switch.
Compressor/
Bridging
Clipping
Output Level
Input
Indicator/
Limiter
Channel
●
●
(8 segments)
●
●
(5 segments)
Mixer/Pre-Amplifier
CAM2
Product
Dimensions
Weight
3 lb.
-
Auxiliary Input (AUX In)
A dedicated unbalanced
auxiliary input for tuner,
CD player, etc.
Frequency
MIC Equiv.
Input
Meter
Response
Noise
±1 dB,
●
-129 dBV
20 Hz-20 kHz
●
±1 dB,
-123 dBV
20 Hz-20 kHz
Accessories
Phantom Power
-
The CAM2 provides power for electret
condenser microphones. The Phantom
ON/OFF switch controls the applications
of DC voltage to each MIC input.
-
MIC Inputs
Balanced MIC level
XLR inputs.
MIC/AUX
Signal-To-
Output
Input
Noise
Impedance
Impedance
Ratio
220-ohm
3.5k/20k
unbalanced,
90 dB
ohms
440-ohm
balanced
600/10k
140
75 dB
ohms
ohms
RPK35B
Rack Mounting
Kit
WMK1
In-Wall
Mounting Kit
-
For
Crosstalk
Product
(adjacent
Info, See:
channels)
> -90 dB
Page 49
Above
> -90 dB