- ページ 20

スキャナー Canon imageFORMULA ScanFront 300PのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Canon imageFORMULA ScanFront 300P 28 ページ。 Network scanner
Canon imageFORMULA ScanFront 300P にも：パンフレット＆スペック (26 ページ), パンフレット＆スペック (33 ページ), ポケットマニュアル (32 ページ), ポケットマニュアル (30 ページ), 仕様 (2 ページ), パンフレット＆スペック (4 ページ)

❏ Network Settings

Follow the procedure below to confirm and configure the

device name and IP address needed to connect the scanner to

a network.

IMPORTANT

• The device name is the name used to identify the scanner on

the network and is set to the 14 alphanumeric characters of

the SF+MAC address by default. When changing this setting,

make sure to select a unique name that is different from those

of all other devices.

• Under default settings, the IP address is assigned

automatically by the DHCP server. When a DHCP server is

not used, clear the [DHCP server Enable] check box, and

enter a fixed address. For details, contact your network

administrator.

• The device name or IP address is used as the URL when

accessing the Web Menu. Be sure to write down both the

device name and IP address in case you forget them.

Press [Administrator setting].

The [Administrator Password] input box appears.

Press [OK] to display the [Administrator setting]

screen.

No administrator password is set by default.

Press [Network setting].