- ページ 5

水ポンプ Akw M17 DigiPumpのPDF 設置および使用上の注意をオンラインで閲覧またはダウンロードできます。Akw M17 DigiPump 20 ページ。 Digipump

Fixing pump to surface

Important: For service & maintenance

purposes this product should be installed

in an accessible location.

The pump unit must be located on a

vertical surface with the inlet/outlet

connections at the bottom of the unit

in horizontal alignment, with the AKW

case logo at the top.

Pipe connections must be easily

accessible and a clearance of 100mm

around the base and sides is

recommended.

Fitting Pump Spacers

Use the Pump Spacers to prevent the cables being trapped.

Separate the spacers, remove the adhesive backing and snap lock into position

Pump Spacers

Power cable

Flow sensor

cables

100mm (4in)

minimum clearance all round

Remove the adhesive tab at

this hole only.