スキャナー Canon L24のPDF 設置マニュアルをオンラインで閲覧またはダウンロードできます。Canon L24 14 ページ。 For direct scanning & copying
Canon L24 にも：スキャナーマニュアル (7 ページ)

Canon

Items Needed at the Installation Site:

Standard Tool Kit

imagePROGRAF iPF670 or iPF770 Service Manual (for

printer installation)

Please Note: Install the imagePROGRAF printer first and verify proper printer operation using roll media before proceeding to install the scanner.

Scanner Unboxing & Initial Preparation:

1. Unbox the scanner, locate the following items in the scanner's box and put each item aside for now:

Scanner Power Supply

Calibration/Stitch Target/sheet

2. Attach both Scanner Mounting brackets on the imagePROGRAF printer by:

3.1. Removing the 4 printer covers shown below

3.2. Fit and mount both left and right brackets as shown below using the supplied screws. The screw locations are shown with 3 small red arrows.

3.3. Replace both left and right lower covers only, as shown with 1 large, dark blue arrow.

Left Side bracket

Installing the L Series Scanner for Direct Scanning & Copying

L Series Scanners L24 & L36 Service Manual (available from the Colortrac

Support Website)

http://www.lseries.colortrac.com



Blank USB2 Flash drive, preformatted FAT 32; must be able to store at least

25Mb of data. This Flash drive can be used to update the scanner firmware.

Ethernet cable

2 Scanner Mounting brackets and 2 Thumb screws

User name:

canon

Password:

scann1ng (note the 'i' is a number 1)

Page 1 of 14

Document Return Guides:

L24 model has 1 guide

L36 model has 3 guides

Right Side Bracket