- ページ 17

コンピュータ・ハードウェア COINTERRA TERRAMINERのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。COINTERRA TERRAMINER 18 ページ。

Powering Down the TerraMiner

Disconnect the power cords from the back of the device, or switch off the power at the wall outlet if you

have switched outlets. The TerraMiner should be located near the power outlets. To disconnect the

TerraMiner, always disconnect both power supply cords.

Do not power down the TerraMiner while a firmware update or Factory Restore

is in progress.

Please be aware that if the TerraMiner is exposed on a network (either LAN or Internet) which is

accessible to other users and devices it may be possible for the TerraMiner to be identified and accessed

on the network. Always ensure that the network is adequately protected (i.e. the TerraMiner is secured

behind a firewall), and that an Admin password is set (see the Web Panel Configuration instructions.) If

the network router has a

in the DMZ device list.

If the TerraMiner is hosted at a data center or other remote location please

ensure that it has been properly protected and its IP address is not exposed on

the open Internet. You may need to request this option from your provider.

Please be aware that if the TerraMiner is located in a place where it could be physically accessed by

others, it is possible for the TerraMiner to be restored to factory default settings (see the Factory

Restore instructions) and new login, mining and network information could be entered. Please ensure

that the TerraMiner is kept in a secure location if this is of concern.

TerraMiner User Guide

DMZ

feature, it is strongly recommended that you do not put the TerraMiner