- ページ 3

グリル DOREGRILL Deco SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DOREGRILL Deco Series 5 ページ。

b) Heating with controlled temperature

- Selection switch C in ROT or MOT position

- Thermostat E at zero

- Thermostat D: regulate to the desired temperature (between 70 ° and 90 °)

- Timer F: depending on the time required for the product to cook.

VERY IMPORTANT: POSITIONING CROSSING SWING MOUNT

The support cross member located along the side window has a square: this square

is directed towards the inside of the oven to support the grid.

On the other hand, this same bracket must be positioned IMPERATIVELY towards

the outside of the oven, that is to say towards the ice when using the star, the

swinging support disc or the spit.

SETTING UP THE EMAIL COVER AND STAINLESS STEEL DEFLECTORS

DRESSING

The inner part of the roasting pan on the button side is fitted with a removable

colored enamel coating.

This covering is instantly attached by buttonholes on three studs in triangle.

MAKE SURE THAT THE FIXING IS LOCKED BY DESCENDING THE PART AND

REMOVING BY REASSEMBLING THE SAME PLATE.

DEFLECTOR

Under the front and rear windows are stainless steel deflectors.

Check that these deflectors are in place and correctly positioned.

The upper part of these deflectors must pass under the windows and behind the

resistors.

UNDER NO CIRCUMSTANCES SHALL RESISTANCES BE COVERED.

RISK OF DANGEROUS OVERHEATING

CLEANING

- Put the sauce tray, the swings and the deflectors to soak

- Impregnate the stained areas with a strong stripper such as Décagrill or similar,

when the roasting pan is still warm.

- Possible application on stainless steel; enamel and ice cream

- Rinse after a quarter of an hour with a damp sponge

- Finish if necessary with white of Spain or methylated spirits