カメラレンズ Canon 5178B002のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Canon 5178B002 2 ページ。 Ef lenses

ページを印刷する

EF Lenses

EF35mm f/2 IS USM

Instructions

Thank you for purchasing a Canon product.

EF35mm f/2 IS USM is a wide-angle single focus lens that provide high

image quality.

●

"IS" stands for Image Stabilizer.

●

"USM" stands for Ultrasonic Motor.

Safety Precautions

●

Do not look at the sun or a bright light source through the lens

or camera. Doing so could result in loss of vision.

Looking at the sun directly through the lens is especially hazardous.

●

Whether it is attached to the camera or not, do not leave the

lens under the sun without the lens cap attached. This is to

prevent the lens from concentrating the sun's rays, which could cause

a fire.

Handling Cautions

●

If the lens is taken from a cold environment into a warm one,

condensation may develop on the lens surface and internal

parts. To prevent condensation in this case, first put the lens into an

airtight plastic bag before taking it from a cold to warm environment.

Then take out the lens after it has warmed gradually. Do the same

when taking the lens from a warm environment into a cold one.

●

Do not leave the lens in excessive heat such as in a car in direct

sunlight. High temperatures can cause the lens to malfunction.

Conventions used in this instruction

Warning to prevent lens or camera malfunction or damage.

Supplementary notes on using the lens and taking pictures.

Nomenclature

① Distance scale

●

② Distance index

●

③ Focusing ring

●

④ Focus mode switch

●

⑤ Image Stabilizer switch

●

⑥ Lens mount index

●

⑦ Contacts

1. Mounting and Detaching the Lens

See your camera's instructions for details on mounting and

detaching the lens.

●

After detaching the lens, place the lens with the rear end up to

prevent the lens surface and contacts from getting scratched.

●

If the contacts get soiled, scratched, or have fingerprints on

them, corrosion or faulty connections can result. The camera

and lens may not operate properly.

●

If the contacts get soiled or have fingerprints on them, clean

them with a soft cloth.

●

If you remove the lens, cover it with the dust cap. To attach it

properly, align the lens mount index and the ○ index of the dust

❶ . To remove it, reverse the order.

●

cap, and turn clockwise

2. Setting the Focus Mode

To shoot in autofocus (AF) mode, set the focus mode switch to AF ❷ .

To shoot in manual focus (MF) mode, set the focus mode switch to MF,

and focus by turning the focusing ring. The focusing ring always works,

regardless of the focus mode ❸ .

After autofocusing in ONE SHOT AF mode, focus manually by

pressing the shutter button halfway and turning the focusing ring.

(Full-time manual focus)

3. Infinity Compensation Mark

To compensate for shifting of the infinity focus point that results from

changes in temperature.

The infinity position at normal temperature is the point at which the

vertical line of the distance scale L mark is aligned with the distance

index ❹ .

For accurate manual focusing of subjects at infinity, look through

the viewfinder or look at the magnified image* on the LCD screen

while rotating the focusing ring.

* For cameras with Live View shooting capability.

❶

●

❷

●

❸

●

❹

Infinity compensation mark

2.3

6.5

f t

0.7

11 11

Distance index