- ページ 13

室内装飾品 Dorel Ameriwood 9902202WYのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dorel Ameriwood 9902202WY 16 ページ。

With assistance of another person, carefully turn the unit over

onto the finished edges. Position the UPPER BACK PANEL

(TT) as shown. One person needs to hold up the bottom edge

of the back panel while another person adjusts the fit and nails

it to the unit. Flush the top edge of the BACK PANEL (TT) with

the top edge of the HUTCH FIXED SHELF (M) and align

squarely with the outer edges of the LEFT HUTCH PANEL (E)

and RIGHT HUTCH PANEL (F).

The hutch panels (E) and (F) must be square with the back

panel when nailing. Align Squarely and nail straight

through into the back edges.

top edge of Hutch Fixed Shelf (M)

x 20

RAW SURFACE

SUPERFICIE CRUDA

NOTE: You need to use a 3/16" diameter drill

bit and make the four holes depicted below

into through holes.

With assistance of another person carefully turn

the unit over onto it's rear surface.

x 4

Attach the DESK TOP (K) from the DESK (model

9151202W) to the HUTCH PANELS (E and F) with four

SCREWS (8).

13 /16

B349902202WY0 3