- ページ 3

バスルームエイド Akw 2000 SeriesのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akw 2000 Series 8 ページ。 Seats

ページを印刷する

This seat must be attached to a finished vertical surface, capable of supporting the specified

weight limits using suitable fixings appropriate to the type of surface and loading conditions to be

applied. Check that the floor surface is suitable for the feet loading conditions. Acrylic shower trays

are not recommended.

Never exceed the weight capacity of 25 stone (158 kg) (350 Ib)

•

Do not use fixings with countersunk heads.

•

Take care not to damage the painted surface on the brackets.

•

Make sure that all fixing holes are used.

•

Stainless steel fixings are recommended but not supplied.

•

Once installed check that the plastic pivot caps are firmly in place

•

and the leg C-clips are installed.

Cushion Assembly

Position the seat pad to seat. Note the front

of the pad is indicated.

The seat pad retainer caps are fitted from

underneath the seat. Each pad has locating

bungs that use a retainer cap (4 in total).

To fit the retainer cap, it should be rotated

in a clockwise direction whilst applying firm

pressure towards the seat pad. The seat pad

may need to be held in position whilst the

retainer caps are fitted.

Be careful not to overtighten the retainer caps. The retainer should be hand tightened so

that it is a secure fit.

Leg Adjustment

One of the legs has fine tuning capability. Some

installations may require one leg to be slightly

longer than the other, to account for the slope of

a shower tray for instance. For such installations,

swap the legs over so that the leg with the screw

and nut above the foot is on the side that needs

to be longer.

Order: 01905 823 299

orders.akw-ltd.co.uk

Installation

Retainer

cap

Technical Support: 01905 560 219

5 4 3 2 1

X X X

Fig. 2