- ページ 30

カメラレンズ Canon CN20x50 SeriesのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Canon CN20x50 Series 41 ページ。 Information display
Canon CN20x50 Series にも：操作マニュアル (33 ページ), クイック・スタート・マニュアル (14 ページ)

ページを印刷する

6 HOW TO ATTACH AND DETACH THE DRIVE UNIT

Set the zoom/focus operation change-over knobs of the

drive unit to MANU. side, set the iris operation mode

change-over switch to "M" side, and then turn the focus,

zoom and iris ring manually and check gear engagement.

Verify that the gear of the drive unit is engaged with the

gear of the lens and tighten the three fixing screws to the

specified torque to fix the drive unit.

* Tightening torque: 63 - 80 N・cm (6.4 - 8.2 kg•cm)

Mount the lens on the camera, connect the 12-pin cable,

switch the power on and adjust the mechanical end

automatically on the display.

* For details on how to adjust the mechanical end

automatically, refer to "6-3 AUTOMATIC ADJUSTMENT OF

THE MECHANICAL END" on the next page.

NOTE

If an error message appears on the display when

the power is turned on, contact Canon Inc. or Canon

distributers & sales representatives.

E22