- ページ 4

キーパッド ASTRO-PHYSICS 1568GTOのPDF メンテナンス取扱説明書をオンラインで閲覧またはダウンロードできます。ASTRO-PHYSICS 1568GTO 17 ページ。

KeYPRo installation

Caution: the KeYPRo fits closely around the keypad controller. You must work it gently into place. if you force the

rubber casing while it is being installed on your keypad, you may tear the rubber.

Procedure:

1. if you are installing a new KeYPRo, or if your old KeYPRo was

removed completely from the keypad and cable, start by insert-

ing the plug end of the cable into the KeYPRo as shown at right.

You must feed the cable from the top/front side of the keypad

protector.

2. feed most of the cable through the opening, but do not pull it

all the way through at this time.

3. insert the display end of the keypad into the KeYPRo.

make sure that it is fully seated and that the wider part

of the keypad is fully encased in the wider part of the

KeYPRo.

4. finally, gently work the cable the rest of the way through and carefully

stretch the thin part at the bottom of the KeYPRo over the cable's strain

relief. again, be very careful that you neither tear the thin part of the

KeYPRo, nor do any damage to the strain relief.

think of the KeYPRo as a bumper for your keypad. this small investment

may save costly repairs in the future.