- ページ 5
カメラレンズ Canon EF 800mm f/5.6L IS USMのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Canon EF 800mm f/5.6L IS USM 18 ページ。 Ultrasonic image stabilizer
Canon EF 800mm f/5.6L IS USM にも： インストラクション (17 ページ)
ページを印刷する
1. Mounting and Detaching the Lens
See your camera's instructions for details on
mounting and detaching the lens.
• After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
• If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
• If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
• If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
K index of the dust cap as shown
index and the
in the diagram, and turn clockwise. To remove it,
reverse the order.
The lens mount has a rubber ring for enhanced
water- and dust-resistance. The rubber ring may
cause slight abrasions around the camera's lens
mount, but this will not cause any problems. If the
rubber ring becomes worn, it is replaceable by a
Canon Service Center at cost.
Attaching the strap
Thread the end of the strap through the strap
mount on the lens and then back through the
clasp on the strap. Pull the strap tight and check
that there is no slack in the clasp.
ENG-4