- ページ 3

バッテリーチャージャー AstroAI 5000AのPDF マニュアルをオンラインで閲覧またはダウンロードできます。AstroAI 5000A 5 ページ。 5000ma

Connection Protection:

This function will protect the battery charger and your vehicle's battery from being damaged if

connected incorrectly.

stage charging process:

Stage 1:initialization, when the charger power on then it start self-check

and detect the battery correct connect.

Stage 2:Bulk charge, using the charger highest rated current for the type

of battery in use until it reaches 80% capacity.

Stage 3:Absorption, the output voltage is limited to 7.2V(6V battery) or

14.4V(12V battery) while current declines as the battery charges

to its full capacity without overheating.

Stage 4:Float, at this stage,the battery is fully charged and the charger

maintains the battery through pulse charging.

Charging Lead-Acid Battery (Not Connected to Vehicle):

1. Connect red clamp of battery charger with the Positive Pole of the Battery (Marked '+').

Connect black clamp of battery charger with the Negative Pole of the Battery (Marked'-')

2. Insert the battery charger's plug into an AC outlet (typically wall outlets).

3. To disconnect, unplug the charger from the AC outlet, then disconnect the clampsfrom

the battery poles.