- ページ 8
カメラレンズ Canon EF200 mmのPDF インストラクションをオンラインで閲覧またはダウンロードできます。Canon EF200 mm 13 ページ。 400mm f/4l is usm extender
Canon EF200 mm にも: 使用方法 (2 ページ), 取扱説明書 (15 ページ), 使用方法 (2 ページ), ユーザーマニュアル (26 ページ), 取扱説明書 (29 ページ), 使用方法 (2 ページ), ユーザーマニュアル (5 ページ)
When compensating for the
•
focusing difference, set the
focus mode switch to MF and
use the focusing ring.
The position of the infrared
•
mark is based on a
wavelength of 800 nm. The
proper position of the infrared
mark may differ slightly
depending on the infrared film
used. Taking several shots
and shifting the distance
setting to a slightly different
position each time is
recommended.
Also read the instructions that
•
came with the infrared film.
Infrared film cannot be used
•
with certain EOS camera
models. Read the camera's
instructions.
ENG-7
9. Tripod Mount
(for EF 200mm f/2.8L II USM, EF 300mm f/4L USM,
and EF 400mm f/5.6L USM lenses)
The EF 300mm f/4L USM lens and EF 400mm f/5.6L USM lens
come with a tripod mount. When the camera is attached with either
lens and it is to be mounted on a tripod, use the lens' tripod mount
instead of the camera body's tripod socket.
If using the EF 200mm f/2.8L II USM lens with an extender or
extension tube, use a ring-type tripod mount A (B) (sold separately)
to mount it on a tripod.
Using the lens' tripod mount gives better balance and stability on a
tripod. By loosening the tripod mount's lock nut, the camera can be
revolved for vertical or horizontal picture conposition.
Be sure to tighten the tripod mount before removing the camera
when using a tripod.