- ページ 23
カメラレンズ Canon XJ80x8.8BのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Canon XJ80x8.8B 44 ページ。 Bctv zoom lens
ページを印刷する
Setting the IS Preferences
During shooting, the IS function can be turned ON/OFF
using the IS operation switch or other accessory.
Using the IS operation switch
Press, release, or hold down the center button to control the
IS function.
IS Operation Switch
Using the accessories with IS operation
switch function
When using an accessory with IS operation function, refer to
the operating instructions of the accessory.
NOTE
The IS function activated by pressing, releasing or holding down the
button varies according to the lens setting.
Setting the IS operation switch
The IS function state alternates between "IS SW-ON"
Alt
and "IS SW-OFF" each time the IS operation switch
is pressed.
The IS function state is momentarily set to "IS SW-
Mom
ON" while the IS operation switch is held down.
Change the setting on the information display.
For details on the information display, refer to the "Display
Operation Manual".
Information Display
Setting the Image Stabilizing
Direction and Characteristics
To select one of the following modes, operate the IS
horizontal (or vertical) direction selector switch.
Standard characteristics
(STD.)
Maximum characteristics
(HIGH)
"Alt" is set by default.
Stop (OFF)
E17
Information Display
IS Horizontal
Direction Selector
Switch
IS Vertical
Direction Selector
Switch
This mode minimizes unnatural movements
by implementing special processing for
the low-frequency shaking caused by slow
camera work and allows smooth operation
during regular camera operation.
This item is set to ensure that the shaking in
all the frequency bands is stabilized at the
maximum characteristics. If low-frequency
shaking is a concern with stationary shots,
the anti-vibration effect is enhanced by
selecting the maximum characteristics.
This stops the IS function.
3 OPERATION