プリンター AstroJet AJ-180のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AstroJet AJ-180 3 ページ。
ページを印刷する
AstroJet AJ-180
Quick Start Guide
Step 1
Unpack Printer and Accessories
Place Printer on a stable surface. Save packaging
material.
Step 2
Connect Power to Printer
1. Check that the Printer
is set for the power
to be used (115V or
220V) [A].
2. Connect one end of
the power cord to the
rear receptacle on
the Printer.
3. Plug other end into a
115-220 Volt AC
(depending on
Printer voltage),
50/60 Hz. grounded
outlet.
DO NOT TURN POWER SWITCH ON YET
Connect Printer to Computer
USB 3.1 Port: Plug
USB cable into
connector [1]. Cable
used to connect
Printer to computer
must not exceed 6
feet long.
Ethernet (Network)
Port: Plug network
Ethernet cable into
connector [2].
Wi-Fi Port: Connect Wi-Fi antenna (included) to this
port [3] for wireless Printer monitoring or operation
through your network.
DO NOT CONNECT USB CABLE
OR NETWORK CABLE YET.
DO NOT TURN PRINTER POWER
SWITCH [1] ON YET.
Page 1