- ページ 5

コントローラー Astrolite WARRIOR 360のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Astrolite WARRIOR 360 13 ページ。

★ ALL: When a chase is running, press this button to adjust the speed and slope of all the steps in the chase.

★ DEL: To delete a scene/chase/chase group, or to delete a step when programming.

★ Latch: Press this button to latch two or more scenes /chases / chase groups,

so that they can run simultaneously.

★ Swap: Press this button to swap the running of a different scene /chase /

chase group (only one running at a time).

★ Flash: Press and hold this button, and then select a scene /chase /chase group to run it; Release the button to

close the running.

★ SlopeSet: Press this button to set a channel with slope. (The pan/tilt channels controlled by the function wheels

are fixed with slope.

★ Music: When a chase is running, press this button to enter sound activation mode.

★ Insert: Press this button to insert a step when programming.

★ Auto: Auto mode is the default chase running mode. Press this button to turn the chase running

from sound mode to auto mode in preset speed and slope.

★ Language: Press Program first and then press this button to toggle Chinese and English.

★ E/XY: Press this button to switch the function of the function wheels from speed/slope

adjustmen (LED off) when chase is running to pan/tilt control (LED on). The speed/slope

adjustment of chase group is by X/Speed only.

★ <=/SETX & =>/SETY: Press the buttons to change the running direction of a running chase,

or to set the pan/tilt movement to the function wheels.

◆ ◆ ◆ ◆ Storage Area of Scene, Chase and Chase Group

★

Chase1 & Chase2: 2 chase groups, each with 18 chases, total 36 chases.

★

Sc1, Sc2 & Sc3: 3 scene groups, each with 18 scenes, total 54 scenes.