- ページ 16

ベビー＆幼児用家具 Dorel Asia WM1646RNのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dorel Asia WM1646RN 20 ページ。 Toddler bed

TODDLER BED

WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E

PRE DRILLED HOLE FACING UP

STEP 11

Insert wood dowels (6) into ends of the wide support slats (O) and narrow support slats (P) as shown.

Insert barrel nut (3) into the hole on the wide surface of center support slat (N). Ensure the barrel nut

(3) is flush with center support slat (N).

Attach the center support slat (N) to the right side rail (L) by inserting hex socket head bolt (2)

through the right side rail (L) and into the barrel nut (3). Use Allen Key (4) to tighten the bolt.

NOTE: The barrel nut (3) can be rotated using a screwdriver (not included) to properly align with

the bolt coming through the side rail.

Insert the wide support slats (O) and narrow support slats (P) into the grooves of the right side rail

(L). Ensure the dowels in the slats go into the holes on the side rail.