- ページ 2

おもちゃ Air Hogs hawk eyeのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Air Hogs hawk eye 4 ページ。 Video camera helicopter

BATTERY INSTALLATION – IR CONTROLLER

1. Open the battery door with a screwdriver (pic.1). 2. If used batteries are present, remove these batteries from the unit by pulling up on one end of each

battery. 3. Install new batteries as shown in the polarity diagram (+/-) inside the battery compartment (pic.2). 4. Replace battery door securely (pic.3).

5. Check your local laws and regulations for correct recycling and/or battery disposal.

STEP ONE

Turn the controller off.

Turn the helicopter to

the charge position.

CONNECTING TO YOUR COMPUTER:

Ask your parents or legal guardian to help you with the next steps.

• Connect the larger end of the provided USB cord to your computer and the smaller end to the controller.

Ensure your computer is ON.

• Once your computer detects the Air Hogs

battery through your computer. You will see the Air Hogs

red alternatively.

• When the charge is complete, the Air Hogs

• To disconnect the Air Hogs

Hawk Eye™ from your computer, DO NOT simply un-plug the USB cable from your

computer and/or from the controller. Safely remove the USB drive as per your computer operating system's

recommendation. For example, in Windows Me

Hardware feature; in Apple OS X™ eject the drive.

Things to remember:

1. The helicopter will have 4-5 minutes of flight time after a 35-45 minute charge.

2. Before you recharge the battery or take the next flight, wait 10-15 minutes to let the battery cool down.

• Turn on your Air Hogs

Hawk Eye™ helicopter. Turn on your controller. You are now

capable of taking videos or pictures, even before you start flying!

• To take videos, press the video button (left) once (pic.1). The Air Hogs

LED will turn from its green standby color to a solid red indicating that video is

recording (pic.2). To stop video recording, press the video button again. The Air Hogs

Hawk Eye™ LED will turn back to green stand-by mode.

NOTE: Do not turn off helicopter while the red light is on for video recording or else the

video cannot be saved. Be sure to stop the video recording by pressing the video button

again in order to save it.

• To take a picture, press the picture button (right) (pic.3). The Air Hogs

automatically adjust focus, ISO setting and shutter speed to take your image. This

Air Hogs

Hawk Eye™ Helicopter:

• Off – LED off

• On – LED solid green

• Video recording mode – LED solid red

• Picture recording mode – LED red for approximately 1.5 seconds

• Charging mode on controller – LED flashing alternatively between

red and green

• Full charge reached – LED flashing green

• Low Air Hogs

Hawk Eye™ battery – LED solid orange

• Memory full – LED flashing orange

HOW TO INSTALL YOUR BATTERIES

pic.1

HOW TO CHARGE YOUR AIR HOGS

STEP TWO

Carefully connect the helicopter

docking port to the controller

docking port. The front of the

helicopter is nearest to the IR

Emitter. Ensure they are properly

connected. Ensure the helicopter

docking port is free of dirt,

especially when you are not using

it. Store it carefully and avoid

getting wet. The charging

connection will be affected if the

connection is rusted or full of dirt.

Hawk Eye™ it will recognize it as a drive and start charging its

Hawk Eye's™ LED flashing green and

Hawk Eye's™ LED will start flashing green only.

, XP

, 2000

, Vista

TAKING VIDEOS OR PICTURES AFTER CHARGING

Hawk Eye™

Hawk Eye™ will

pic.1

pic.2

HAWK EYE™

STEP THREE

or Windows 7

use the Safely Remove

takes about 1.5 seconds, during which time the LED will turn from green to red (pic.2).

Once the LED has turned green again, you're ready to take your next picture.

NOTE: If the picture button is pressed while a video is recording, the video is stopped

and a picture is taken. You can start the video recording again by pressing the video button.

• For best picture quality try to keep the helicopter flying straight and steady.

• Video quality is also best during straight flight. Keep turns to a minimum.

• Please respect the privacy of others. Proper consent of others and parents should be

taken before taking and/or distributing pictures and videos of other people.

• Ensure there is enough light in the room when you are taking videos or pictures. This

can affect the quality of the videos or pictures. Because of the size of the camera, it

cannot capture a lot of light in a dim room.

pic.2

LED INDICATIONS

IR Controller:

• Off/Download/Charging mode – LED off

• On – LED solid green

• Low controller battery – LED flashing green

pic.3

STEP FOUR

Connect the small end of the

provided USB cord to the

small USB port located at the

bottom of the controller.

pic.3