- ページ 10

冷蔵庫 Coldtainer F0140/NDNのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Coldtainer F0140/NDN 16 ページ。

To operate the thermostat the touchscreen keys are

The display can show following alarm labels:

"Pr1" cabinet probe alarm

"AL"

low temperature alarm

"AH"

high temperature alarm

witCh on the

Ensure at all times that there is sufficient ventilation so that the heath generated

during operation can dissipate. Ensure that the ventilation slots are not covered

and that the units is sufficiently far away from walls or other objects so that the air

can circulate.

Switch on the unit by turning the main switch to position "I".

The digital thermostat will run a self-test. Following the initialization, the present

temperature inside the unit appears. The factory preset temperature for all models

is +4°C.

witCh off the

Switch off the unit always by pressing the main switch to position "O". The unit will

take the last set temperature in memory. If you do not want to use the cooler for a

longer period of time, leave the cover slightly open. This prevents odor build-up.

/ U

oCk

nloCk the keypad

If 30 seconds have elapsed without the keys being pressed, the display will show

the "Loc" label and the keypad will lock automatically.

To unlock the keypad, touch a key for 1 second: the display will show the label

"UnL".

odify the setpoint

Check that the keypad is not locked

1. Touch the SET key

2. Touch the UP or DOWN key within 15 seconds to set the new value

3. Touch the SET key (or do not operate for 15 seconds)

etting ConfigUration parameters

1. Touch the SET key for 4 seconds; the display will show the label "PA"

2. Touch the SET key, the display will show the value "0"

3. Touch the UP or DOWN key within 15 seconds to set "-19"

nit