- ページ 11

ソフトウェア Canon EOS Digital RebelのPDF ホワイトペーパーをオンラインで閲覧またはダウンロードできます。Canon EOS Digital Rebel 29 ページ。 Canon eos 5d mark ii: software guide
Canon EOS Digital Rebel にも：ソフトウェアマニュアル (13 ページ), 取扱説明書 (19 ページ), パンフレット＆スペック (22 ページ)

ページを印刷する

EV 18. Finally, the wider focusing area with nine AF points and the diagonal configura-

tion of AF points in and around the center afford improved subject focus tracking.

Focusing speed is on a par with that of the EOS 30D because the Digital Rebel XTi

shares its high-speed 32-bit RISC microcomputer. The algorithm for AI SERVO AF contin-

uous shooting has been fine-tuned and optimized for 3 frames per second.

In the Creative Zone modes, the following AF modes can be selected with the AF mode

selection screen: One-Shot AF (when focus is achieved, AF operation stops and locks),

Predictive AI SERVO AF (tracks subject movement and focuses continuously until the start

of exposure) and AI Focus AF (automatic switching between One-Shot and Predictive AI

Servo AF). In the Basic Zone modes, the optimum AF mode is selected automatically, a

convenience for the less technically inclined, certainly a part of the XTi's demographic. In

the Sports, Flash Off, and Basic Zone's Full Auto modes, the beeper sounds softly (when

the beeper is enabled) when focus is achieved with AI SERVO AF. In the Creative Zone

modes with AI SERVO AF, the beeper does not sound when focus is achieved. The AF

mode can be set even while the lens focus mode switch is set to MF. (When focus is

achieved, the focus confirmation icon and superimposed display lights up.) However,

"MF" will be displayed on the LCD screen when it displays the camera settings

The predictive AF calculation speed is the same as that of the Digital Rebel XT. With an

EF300mm f/2.8L IS USM lens, the camera can focus-track a moving subject approaching

at 31 mph/50 kph up to about 32.8 feet/10 meters away. As with the EOS 30D, the

lens drive keeps still when focusing a still subject with AI SERVO AF. If the subject

begins to move, the camera can start to focus-track the subject immediately because

focus detection is conducted continuously. As in the case of the EOS 30D, if you press

the shutter button completely in one quick stroke (rather than pressing halfway first),

the lens will focus, if possible, before the picture is taken. If focusing is not possible,

the picture will be taken anyway to give priority to taking the picture. This extreme

instance of shooting priority is especially useful should something occur that is so

remarkable that even less than perfect focus will not spoil the record of the moment.

As with the Digital Rebel XT, the XTi's AF-assist beam is a series of stroboscopic flashes.

It is not emitted in the Landscape, Sports or Flash OFF modes. In a Creative Zone mode,

it fires automatically when the built-in flash has been popped up manually. Firing can

be enabled/disabled with C.Fn-5. Emission time is 250 ms or less. The working range

is approximately 13.1 feet/4 meters at the center and approximately 11.5 feet/3.5

III. FEATURE DISCUSSION

Because the Digital Rebel XTi uses the same AF point

selection algorithm as the EOS 30D, there is a high prob-

ability that the correct AF point will be selected automati-

cally. The selection procedure is the same as with the

Digital Rebel XT. With the Digital Rebel XTi, you can select

the AF point manually on the LCD screen's large and easy-

to-read display.