- ページ 9

ベビーカー Dorel Juvenile Group 01-668のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dorel Juvenile Group 01-668 12 ページ。 Stadium-seating tandem stroller

ページを印刷する

To Attach Car Seats:

If you have an Eddie Bauer

explain how to attach the car seat(s) to the stroller. Complete instructions for using the car seats are located on the back

of the car seat.

Rear seat: Remove mounting bar

from between frame beneath front

seat. (Grasp red handle and push

toward center of bar to release from

frame.)

Front seat: Place seat back in upright

position. Remove mounting bar from

back of front seat frame. (Grasp one

end and pull back to release bar from

seat frame).

Note: When using two car seats,

1. The front stroller seat must be

forward-facing.

2. Both car seats must be rear-facing.

3. Both front and rear trays must be

in place when car seats are attached.

4. Make sure both car seats are

locked in place before placing child

in car seat.

, Cosco

or Safety 1st

Place mounting bar into the two

holes on the inside of stroller arms.

Put one end in first, the pull in on the

other end to put into second hole.

Place mounting bar into the two holes

on the inside of seat back as shown.

Put one end in first, then, compress

bar to place other end into second

hole. Place seat in upright position.

To Remove Car Seats:

To remove each car seat, pull up on

the 1-hand release handle and lift

car seat out.

02-600 or 22-600 series infant car seat(s), the following instructions

With back of stroller seat in the re-

clined position, pull up on the 1-hand

release handle on back of car seat and

place seat rear facing into mounting

bar firmly (listen for locking click).

Pull up on the 1-hand release handle

on back of car seat and place car

seat rear facing into mounting bar

firmly (listen for locking click) until

fully locked.

WARNING:

To avoid serious injury

• Always use tray when car seat

is attached.

• Always attach car seat facing to

the rear of the stroller.

• Always use the restraint system.

• Place mounting bar in storage

position when not in use.