- ページ 9

フロアマシン Advance acoustic AquaClean Classic 56262640のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Advance acoustic AquaClean Classic 56262640 11 ページ。

AFTER USE

Turn the Master Switch and the Brush Switch OFF.

Unplug the Power Cord and wrap it around the handle.

Empty the recovery tank, rinse it clean and wipe it dry.

Empty the solution tank. To drain, pull the clear hose down and

off of the storage peg. When the tank is empty, put the hose back

on the storage peg.

Remove any dirt from the filter screen in the solution tank.

Put the recovery tank and its cover back on the machine.

Push the handle to the forward, locked position so the brush

housing raises clear of the floor. This will prevent the brush from

taking a "set".

For more compact storage, remove the recovery tank, loosen the

handle wing nuts and push the handle down over the solution

tank.

Perform any required maintenance before storage.

Store in a clean, dry place.

Periodically check the brush and remove any built-up string, hair or

carpet fibers.

Periodically check the vacuum shoe and remove any built-up string, hair

or carpet fibers.

Have the vacuum motor carbon brushes checked every 450 hours by a

qualified Nilfisk-Advance service person. Replace the carbon brushes

if they are worn to 3/8" (9.5 mm) or less.

IMPORTANT!

Motor damage resulting from failure to service carbon brushes is not

covered under warranty. See the Limited Warranty statement.

Remove the Spray Nozzle (A) once a week and soak it overnight in a

vinegar and water rinse to remove chemical deposits.

Once a month (or every 30 hours) lubricate all pivot points associated

with the valve assembly on the bottom of the machine. For best results,

use a spray silicone lubricant.

revised 2/01

FORM NO. 56041303 - AquaClean

™

CLASSIC - 9