- ページ 18

回転する車輪 Daedalus Roly-PolyのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Daedalus Roly-Poly 20 ページ。

Daedalus Battery
All of our Daedalus machines require 15V power. Our official Daedalus
Battery can change voltage simply by pressing the power button until
15V appears. The Daedalus Battery uses an 18V 3amp power supply.
Do not swap this power supply with any other power supply for any
reason.
Input (long side of battery) - for charging your battery
Output (short side of battery) - for powering your machine
Best Practices
Do not attempt to charge the battery and operate the device
at the same time.
Do not use your machine's power supply to charge the
battery. Conversely, do not use the battery's power supply to
power your machine. Label your cords to avoid a mixup.
If your machine is going slower/faster than you remember it
spinning at your usual settings, check the battery setting to
ensure that it is still set to 15V.
The battery will power off if the device is not drawing enough
power from it. This happens with the Sparrow if the speed is
set too low, and sometimes with the Starling. To compensate
for this, you can use a USB-powered light while your battery is
in use or simply charge your phone using the USB port.
To ensure the longest possible life for your Daedalus Battery,
please do not store it fully charged for extended periods of
time. The proper storage charge is between 50% and 75%.
16
Make sure your battery is set to 15V