- ページ 6

ミシン Daedalus SparrowのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Daedalus Sparrow 20 ページ。 Spinning wheels

Setting Up for Irish Tension

Irish tension provides more takeup, or pulling in of the yarn, than

Scotch tension. Changing to Irish tension is as easy as removing the

flyer, tension belt, and motor drive belt.

First, detach the motor and its mount by pushing down on one edge

with both thumbs. The other side now comes free easily.

You will need to slide the motor mount in a rocking motion until it

aligns under the small bobbin whorl at the rear of the bobbin and the

Turn the motor so that

it now faces the rear,

and snap it back onto

the carbon tubes. Place

the motor drive belt

over the rear frame and

re-install the flyer.

Install the motor drive

belt over the bobbin's

small whorl. Verify the

alignment of the clear

motor drive belt (it

being parallel to the

rear frame) or gently

slide the motor until

it aligns directly under

the small whorl of the

bobbin.

Install the tension belt

at the front, over the

flyer groove. Please

note that your direction

switch will be opposite

in Irish as compared to

Scotch (meaning that I

is S and II is now Z).