- ページ 9

ミシン Daedalus SparrowのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Daedalus Sparrow 20 ページ。 Spinning wheels

• The module should light up and show the current set speed.

Adjust this as necessary using the Up/Down arrows, and then

press the Daedalus logo on the Speed Controller. The display

will show "- - -" which is stopped.

• Attach your fiber to the leader loop. Verify the display says

"---" which means it is stopped. Flip the direction switch to the

desired direction (I is Z twist, II is S twist in Scotch tension and

reversed for Irish tension).

• When ready, press the Daedalus logo. The wheel will slowly

accelerate for 3 seconds to your set speed %. You can fine-

tune your speed while spinning by using the Up/Down arrows.

When it's time to advance your yarn guide, press the logo and

the wheel will slowly decelerate for 3 seconds and come to a

stop.

• Increase or decrease your speed using the up and down

arrows. Pay attention to the takeup and adjust the

tension knob accordingly. Fine-tune your speed as you get

comfortable. You will need to slightly adjust the tension as you

change your speed and as the bobbin fills with yarn.