ワークライト DAEHAN BAR S 480のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DAEHAN BAR S 480 4 ページ。 Super bright s-led module
ページを印刷するUser Guide
SPECIFICATIONS
PRECAUTIONS
BAR S Series
ELECTRICAL
Model
Current Dissipation
BAR S 960
400mA
BAR S 480
200mA
BAR S 240
100mA
BAR S 120
50mA
Electronic dimming control supported
PHYSICAL
Model
Length
960mm
BAR S960
480mm
BAR S480
240mm
BAR S240
BAR S120
120mm
Use precautions to avoid damages to the product or injuries of users. Any actions against following contents will cause serious
issues such as malfunction, electric shock, or burn.
USE DC24V ONLY
AC INPUT
DO NOT USE AC INPUT
Do not cut or rejoion wires while product
is connected wth live power source
Avoid performing installation under rain or
high humidity for outdoor use
Do not use the product under circumstances
listed below
- High temperature spots over 60˚C (140˚F)
- Spots draw extreme moisture or dust
- Spots have corrosive gas or highly effectied
by electromagnetic field
DAEHANTRANS CO.,LTD
#7-11 Songdo-Dong, Yeonsu-Gu, Incheon, Korea
Tel. +82 32 858 0491 Fax. +82 32 832 8421 [email protected] / www.daehantrans.com
Power Dissipation
Operating Power
9.6W
4.8W
2.4W
1.2W
Width
Thickness
Weight
21mm
9.5mm
21mm
9.5mm
21mm
9.5mm
21mm
9.5mm
Max Serial Connection
DC24V
5.0 Meters
DC24V
5.0 Meters
DC24V
5.0 Meters
5.0 Meters
DC24V
LED Lamp Pitch
224g
20mm
106g
20mm
56g
20mm
26g
20mm
Epoxy Molding
Do not perform actions listed below
- Alter or modify
- Touch LED lamps with sharp objects
- Put glue or silicon over the LED lamps
Maximum driver quantity per serial
connection is limited. Failure causes overload
of current and damages to the product
Refer to 'WIRE THICKNESS' table to use proper
wire thickness between SMPS and the first
LED module
Failure will cause dimmed output
Cable length between SMPS and the first LED
module is limited. Refer to 'CONNECTION
WITH POWER SUPPLY' on page 2
1
IP65