- ページ 7

計測機器 Cole Parmer 1200 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cole Parmer 1200 Series 18 ページ。

1200 and 1201 Spectrophotometer Operation Panel

Mode Indicator: Show the current measurement mode (T--%Transmittance, A--

Absorbance, C--Concentration, and F--Factor) (refer to Figure-3).

Sample compartment

Figure-3

MODE Button: There are four modes.

T mode is transmittance mode;

A mode is absorbance mode;

C mode is to measure unknown sample concentration through a standard solution;

F mode is to measure unknown value with a previously determined factor.

∧ (0A/100%T) Button: Adjust Digital Display reading to 100%T or 0.000A when blank

reference solution is in the Sample Compartment.

∨ (0%T) Button: When in T mode, put S-1200-111 into the Cuvette Holder to block the

optical light beam. Press ∨ button to adjust the Digital Display reading to 00.0%T.

ENT (PRINT) Button: When pressed:

At A and T modes, send the displayed results to printer;

At C mode, set the concentration value (refer to Concentration Mode in Basic

Operation section);

LCD Display

Mode

Wavelength Knob

Cole Parmer 1200 Spectrophotometer

0A/100%T

0%T

Print/Enter