- ページ 2
サーバー Doremi JNIOR 310のPDF インストールとセットアップをオンラインで閲覧またはダウンロードできます。Doremi JNIOR 310 3 ページ。
ページを印刷するSetup DCP2000 for JNIOR 310
GPO outputs
Register the jnior device on the dcp2000
1) Menu / Doremi Labs, Inc / Device Manager
2)
Add a new device: select JNIOR
3) Set the IP address
4) Set username & password field to jnior
5) Check the configuration and save
6) Confirm the admin password, (default= 1234)
7) Reboot the DCP2000
Configure the GPO actions related to JNIOR
9) Run the Macro Editor
10) Create a new macro, press
11) To attach an action to the new macro
12) Select "Insert new Action"
13) Select 'Library' to browse existing actions
14) Select "jnior" from the list to the left list
15) Select the action from the right list, & OK
16) "Select a device" from the drop down box
17) Select "jnior" & click OK
18) Check and save (default password = 1234)
Test your set up:
Menu / Doremi Labs, Inc / Macro Execution
Select one of the macro's you have created and
execute it. Watch the JNIOR, you will see the
orange activity led flash and the red output led
react accordingly.