- ページ 10

コンピュータ・ハードウェア Doremi MB-4KのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Doremi MB-4K 15 ページ。

4.4 Report generation

The unit generate from log files while running. If you encounter an issue, you need to generate a

report. This report will contain the log files and some information on the current state of the unit.

It will help the technical support team to identify the issue.

To generate this report, connect to the unit as admin with Ethernet with a ssh connection or with

the RS232 serial port and execute the following command:

type:

/doremi/sbin/report.sh <enter>

This will generate in directory /doremi/tmp a file with name drmreport_yyyy-mm-dd.tgz where

yyyy is the year, mm is the month and dd is the day. For example:

/doremi/tmp/drmreport_2007-08-16.tgz.

Send this file to the technical support team when contacting them.

Configuration files can be present to specify a configuration different that the default one to be

used at boot time. Those files, when present are used during the boot sequence to set the unit

accordingly. Change those file will only take effect after the next reboot of the unit.

Such files are text file present in directory /doremi/etc/beluga

To change or create a configuration file, use the following procedure:

connect to the MB-4K via Ethernet using a ssh connection or via the RS232 serial port

run the beluga_conf application with the configuration file name and the value to set it to

as 2 parameters (in that order) :

/doremi/bin/beluga_conf configuration_file_name value

See the following sections for the allowed configuration names and value associated.

Note 1: configuration file names are case sensitive.

Note 2: those configuration files and setting method are used since software 0.1.2-8.

The different configurations can be set manually at anytime, taking effect immediately. Those

configurations will be lost at the next reboot though. Most configurations for the output are set

with a bit in register 0x00. The general way to change a setting is the following procedure:

connect to the MB-4K via Ethernet using a ssh connection or via the RS232 serial port

run the beluga_app that you can find in the /doremi/sbin directory :

/doremi/sbin/beluga_app

MB_4K_Manual_000234_v1_3.doc

M4K.OM.000234.DRM

Page 10

Version 1.3

Doremi Labs, Inc Confidential