- ページ 13

メディア・コンバーター Doremi Labs HDVI-20sのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Doremi Labs HDVI-20s 16 ページ。

8 Firmware Upgrade

To upgrade the firmware of the HDVI-20d, you need to have the HDVI-20d RS422-PC cable. You

also need to have the 3 files HDVI20.exe, HDVI-20_Uploader.bat and the HDVI-20 bin file in your

DOS directory. The DOS directory is the default directory when you launch the Command Prompt

application under Windows.

1. Connect the HDVI-20d RS422-PC cable to a COM port on your PC

2. Connect the HDVI-20d to a DVI monitor

3. Force the HDVI-20d in flash mode by pressing and holding the TV/Video on your infrared

remote until the picture becomes red.

4. Double click on the HDVI20_Uploader.bat icon and enter the serial port connected to the

HDVI-20d and hit ENTER

5. Enter the binary file name of the HDVI-20 bin file and hit ENTER

6. The screen will start showing you progress and it will quit after the upgrade is over.

7. Recycle power on the HDVI-20d and go to the last menu and make sure the new firmware

is installed.