- ページ 10

マザーボード Asus A88X-PLUSのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Asus A88X-PLUS 37 ページ。
Asus A88X-PLUS にも： マニュアル (19 ページ)

ページを印刷する
Asus A88X-PLUS オーナーズマニュアル
1.2.1

Layout contents

Connectors/Jumpers/Slots/LED
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
1.
APU and chassis fan connectors (4-pin APU_FAN, 4-pin CHA_FAN1/2)
2.
3.
AMD
FM2+ APU socket
®
4.
DDR3 DIMM slots
5.
USB 3.0 connector (20-1 pin USB3_12)
6.
AMD
A88X SATA 6.0Gb/s ports (SATA6G_1~8)
®
7.
System panel connector (20-5 pin PANEL)
8.
USB 2.0 connectors (10-1 pin USB34/56/78)
9.
Clear RTC RAM (2-pin CLRTC)
10. Serial Port Connector (10-1 pin COM)
11. Front panel audio connector (10-1 pin AAFP)
12. Digital audio connector (4-1 pin SPDIF_OUT)
13. PCI slots
14
PCI Express 3.0/2.0 x16 slots
15
PCI Express 2.0 x1 slots
1.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
•
•
•
2.
APU and chassis fan connectors (4-pin APU_FAN, 4-pin CHA_FAN1/2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
1-2
We recommend that you use an EATX 12V Specification
2.0-compliant power supply unit (PSU) with a minimum of 300W
power rating. This PSU type has 24-pin and 4-pin power plugs.
DO NOT forget to connect the 4-pin ATX +12V power plug.
Otherwise, the system will not boot up.
We recommend that you use a PSU with higher power output
when configuring a system with more power-consuming devices
or when you intend to install additional devices. The system may
become unstable or may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply
requirement for your system, refer to the Recommended
Power Supply Wattage Calculator at http://support.asus.com/
PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for
details.
ATX12V
+12V DC
+12V DC
EATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
PIN 1
Chapter 1: Product introduction
Page
1-2
1-2
1-3
1-3
1-3
1-3
1-3
1-4
1-4
1-5
1-5
1-5
1-5
1-5
1-6
PIN 1
GND
GND
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts