- ページ 5

コントローラー Cole Parmer EW-36223-04のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cole Parmer EW-36223-04 20 ページ。 Heating controller

ページを印刷する

3. SAFETY INFORMATION.

This product has been designed for safe operation when used as detailed in

SAFETY INFORMATION

accordance with the manufacturer's instructions.

3. SAFETY INFORMATION.

This product has been designed for safe operation when used as detailed in accordance

NOTE: Failure to use this equipment in accordance with this instruction book may

with the manufacturer's instructions.

compromise your basic safety protection afforded by the equipment and may

This product has been designed for safe operation when used as detailed in

invalidate the warranty / guarantee. The warranty / guarantee does not cover

accordance with the manufacturer's instructions.

NOTE: Failure to use this equipment in accordance with this instruction manual may

damaged caused by faulty installation or misuse of the equipment.

3. SAFETY INFORMATION.

compromise your basic safety protection afforded by the equipment and may invalidate

NOTE: Failure to use this equipment in accordance with this instruction book may

3.1. Prevention of Fire and Electric shock.

the warranty / guarantee. The warranty / guarantee does not cover damaged caused by

compromise your basic safety protection afforded by the equipment and may

3. SAFETY INFORMATION.

This product has been designed for safe operation when used as detailed in

invalidate the warranty / guarantee. The warranty / guarantee does not cover

faulty installation or misuse of the equipment.

3. SAFETY INFORMATION.

accordance with the manufacturer's instructions.

damaged caused by faulty installation or misuse of the equipment.

This product has been designed for safe operation when used as detailed in

3. SAFETY INFORMATION.

NOTE: Failure to use this equipment in accordance with this instruction book may

accordance with the manufacturer's instructions.

3.1. Prevention of Fire and Electric shock.

This product has been designed for safe operation when used as detailed in

3.1. Prevention of Fire and Electric shock.

compromise your basic safety protection afforded by the equipment and may

3. SAFETY INFORMATION.

accordance with the manufacturer's instructions.

NOTE: Failure to use this equipment in accordance with this instruction book may

invalidate the warranty / guarantee. The warranty / guarantee does not cover

This product has been designed for safe operation when used as detailed in

compromise your basic safety protection afforded by the equipment and may

damaged caused by faulty installation or misuse of the equipment.

accordance with the manufacturer's instructions.

3. SAFETY INFORMATION.

NOTE: Failure to use this equipment in accordance with this instruction book may

This product has been designed for safe operation when used as detailed in

invalidate the warranty / guarantee. The warranty / guarantee does not cover

compromise your basic safety protection afforded by the equipment and may

accordance with the manufacturer's instructions.

damaged caused by faulty installation or misuse of the equipment.

NOTE: Failure to use this equipment in accordance with this instruction book may

3.1. Prevention of Fire and Electric shock.

invalidate the warranty / guarantee. The warranty / guarantee does not cover

This product has been designed for safe operation when used as detailed in

3. SAFETY INFORMATION.

compromise your basic safety protection afforded by the equipment and may

damaged caused by faulty installation or misuse of the equipment.

accordance with the manufacturer's instructions.

NOTE: Failure to use this equipment in accordance with this instruction book may

invalidate the warranty / guarantee. The warranty / guarantee does not cover

3.1. Prevention of Fire and Electric shock.

compromise your basic safety protection afforded by the equipment and may

damaged caused by faulty installation or misuse of the equipment.

This product has been designed for safe operation when used as detailed in

3.1. Prevention of Fire and Electric shock.

NOTE: Failure to use this equipment in accordance with this instruction book may

invalidate the warranty / guarantee. The warranty / guarantee does not cover

accordance with the manufacturer's instructions.

compromise your basic safety protection afforded by the equipment and may

damaged caused by faulty installation or misuse of the equipment.

3.1. Prevention of Fire and Electric shock.

3. SAFETY INFORMATION.

invalidate the warranty / guarantee. The warranty / guarantee does not cover

NOTE: Failure to use this equipment in accordance with this instruction book may

damaged caused by faulty installation or misuse of the equipment.

3.1. Prevention of Fire and Electric shock.

compromise your basic safety protection afforded by the equipment and may

This product has been designed for safe operation when used as detailed in

invalidate the warranty / guarantee. The warranty / guarantee does not cover

3.1. Prevention of Fire and Electric shock.

accordance with the manufacturer's instructions.

damaged caused by faulty installation or misuse of the equipment.

3.2. General Safe Operating Practice.

damaged caused by faulty installation or misuse of the equipment.

NOTE: Failure to use this equipment in accordance with this instruction book may

3.1. Prevention of Fire and Electric shock.

compromise your basic safety protection afforded by the equipment and may

invalidate the warranty / guarantee. The warranty / guarantee does not cover

damaged caused by faulty installation or misuse of the equipment.

3.2. General Safe Operating Practice.

3.1. Prevention of Fire and Electric shock.

3.2. General Safe Operating Practice.

Page 5 of 24

To prevent a risk of fire or electric shock, DO NOT open your

product case without authorisation. Only qualified Service

personnel should attempt to repair this Controller.

Replace fuses only with the type as listed in section, Parts and

To prevent a risk of fire or electric shock, do not open your product case

Accessories and Technical Specifications. (See fuse type and

To prevent a risk of fire or electric shock, DO NOT open your

without authorisation. Only qualified Service personnel should attempt to

rating).

product case without authorisation. Only qualified Service

repair this Controller.

personnel should attempt to repair this Controller.

Ensure the Mains Power Supply conforms to rating found on the

data plate located on the base of this product.

Replace fuses only with the type as listed in section, Parts and

Only replace fuses with the type as listed in Technical Specification section

Accessories and Technical Specifications. (See fuse type and

To prevent a risk of fire or electric shock, DO NOT open your

Never Operate this equipment with out connection to earth /

(See fuse type and rating).

rating).

product case without authorisation. Only qualified Service

ground. Ensure the mains supply voltage is correctly earthed /

To prevent a risk of fire or electric shock, DO NOT open your

personnel should attempt to repair this Controller.

grounded in accordance with current area legislation.

Ensure the Mains Power Supply conforms to rating found on the

Ensure the Mains Power Supply conforms to rating found on the data plate

product case without authorisation. Only qualified Service

To prevent a risk of fire or electric shock, DO NOT open your

data plate located on the base of this product.

Replace fuses only with the type as listed in section, Parts and

Do not install or remove any heating apparatus from the controller

personnel should attempt to repair this Controller.

located on the base of this product.

product case without authorisation. Only qualified Service

Accessories and Technical Specifications. (See fuse type and

whilst power is applied.

Never Operate this equipment with out connection to earth /

To prevent a risk of fire or electric shock, DO NOT open your

personnel should attempt to repair this Controller.

Replace fuses only with the type as listed in section, Parts and

rating).

ground. Ensure the mains supply voltage is correctly earthed /

Never operate this equipment without connection to earth / ground. Ensure

product case without authorisation. Only qualified Service

Accessories and Technical Specifications. (See fuse type and

To prevent a risk of fire or electric shock, DO NOT open your

Replace fuses only with the type as listed in section, Parts and

grounded in accordance with current area legislation.

Ensure the Mains Power Supply conforms to rating found on the

personnel should attempt to repair this Controller.

the mains supply voltage is correctly earthed / grounded in accordance with

rating).

product case without authorisation. Only qualified Service

Accessories and Technical Specifications. (See fuse type and

Always follow good laboratory practice when using this

data plate located on the base of this product.

Do not install or remove any heating apparatus from the controller

To prevent a risk of fire or electric shock, DO NOT open your

Replace fuses only with the type as listed in section, Parts and

personnel should attempt to repair this Controller.

current area legislation.

rating).

equipment. Give due recognition to your company's safety and

Ensure the Mains Power Supply conforms to rating found on the

whilst power is applied.

Never Operate this equipment with out connection to earth /

product case without authorisation. Only qualified Service

Accessories and Technical Specifications. (See fuse type and

legislative health & safety procedures and all associated legislation

data plate located on the base of this product.

Replace fuses only with the type as listed in section, Parts and

Ensure the Mains Power Supply conforms to rating found on the

ground. Ensure the mains supply voltage is correctly earthed /

personnel should attempt to repair this Controller.

rating).

Do not install or remove any heating apparatus from the controller

applicable to your areas of operation. Check laboratory procedures

To prevent a risk of fire or electric shock, DO NOT open your

Accessories and Technical Specifications. (See fuse type and

To prevent a risk of fire or electric shock, DO NOT open your

data plate located on the base of this product.

Never Operate this equipment with out connection to earth /

grounded in accordance with current area legislation.

for substances being heated and ensure all hazards (e.g. explosion,

Ensure the Mains Power Supply conforms to rating found on the

Replace fuses only with the type as listed in section, Parts and

whilst power is applied.

product case without authorisation. Only qualified Service

rating).

product case without authorisation. Only qualified Service

ground. Ensure the mains supply voltage is correctly earthed /

Always follow good laboratory practice when using this

Never Operate this equipment with out connection to earth /

implosion or the release of toxic or flammable gases) that might

Do not install or remove any heating apparatus from the controller

Accessories and Technical Specifications. (See fuse type and

data plate located on the base of this product.

personnel should attempt to repair this Controller.

grounded in accordance with current area legislation.

equipment. Give due recognition to your company's safety and

Ensure the Mains Power Supply conforms to rating found on the

ground. Ensure the mains supply voltage is correctly earthed /

arise have been suitably addressed before proceeding. When

whilst power is applied.

rating).

Never Operate this equipment with out connection to earth /

legislative health & safety procedures and all associated legislation

Replace fuses only with the type as listed in section, Parts and

data plate located on the base of this product.

Replace fuses only with the type as listed in section, Parts and

grounded in accordance with current area legislation.

heating certain substances the liberation of hazardous gases may

Do not install or remove any heating apparatus from the controller

Ensure the Mains Power Supply conforms to rating found on the

applicable to your areas of operation. Check laboratory procedures

ground. Ensure the mains supply voltage is correctly earthed /

Accessories and Technical Specifications. (See fuse type and

To prevent a risk of fire or electric shock, DO NOT open your

require the use of a fume cupboard or other means of extraction.

whilst power is applied.

Never Operate this equipment with out connection to earth /

Do not install or remove any heating apparatus from the controller

data plate located on the base of this product.

grounded in accordance with current area legislation.

for substances being heated and ensure all hazards (e.g. explosion,

rating).

Always follow good laboratory practice when using this Equipment. Give

rating).

product case without authorisation. Only qualified Service

Always follow good laboratory practice when using this

ground. Ensure the mains supply voltage is correctly earthed /

whilst power is applied.

Ensure equipment is used on a clean, dry, non-combustible, solid

implosion or the release of toxic or flammable gases) that might

personnel should attempt to repair this Controller.

Never Operate this equipment with out connection to earth /

Do not install or remove any heating apparatus from the controller

due recognition to your company's safety and legislative health & safety

Ensure the Mains Power Supply conforms to rating found on the

grounded in accordance with current area legislation.

equipment. Give due recognition to your company's safety and

Ensure the Mains Power Supply conforms to rating found on the

work surface with at least 300mm suitable clearance all around

arise have been suitably addressed before proceeding. When

ground. Ensure the mains supply voltage is correctly earthed /

whilst power is applied.

legislative health & safety procedures and all associated legislation

data plate located on the base of this product.

Always follow good laboratory practice when using this

data plate located on the base of this product.

Replace fuses only with the type as listed in section, Parts and

from other equipment.

procedures and all associated legislation applicable to your areas of operation.

heating certain substances the liberation of hazardous gases may

Do not install or remove any heating apparatus from the controller

grounded in accordance with current area legislation.

applicable to your areas of operation. Check laboratory procedures

equipment. Give due recognition to your company's safety and

Accessories and Technical Specifications. (See fuse type and

Always follow good laboratory practice when using this

require the use of a fume cupboard or other means of extraction.

Never Operate this equipment with out connection to earth /

whilst power is applied.

Check laboratory procedures for substances being heated and ensure all

Never Operate this equipment with out connection to earth /

Do not position the product so that it is difficult to disconnect from

for substances being heated and ensure all hazards (e.g. explosion,

legislative health & safety procedures and all associated legislation

rating).

Do not install or remove any heating apparatus from the controller

equipment. Give due recognition to your company's safety and

ground. Ensure the mains supply voltage is correctly earthed /

the mains supply.

hazards (e.g. explosion, implosion or the release of toxic or flammable gases)

Ensure equipment is used on a clean, dry, non-combustible, solid

applicable to your areas of operation. Check laboratory procedures

implosion or the release of toxic or flammable gases) that might

Always follow good laboratory practice when using this

legislative health & safety procedures and all associated legislation

whilst power is applied.

grounded in accordance with current area legislation.

Ensure the Mains Power Supply conforms to rating found on the

work surface with at least 300mm suitable clearance all around

for substances being heated and ensure all hazards (e.g. explosion,

arise have been suitably addressed before proceeding. When

equipment. Give due recognition to your company's safety and

that might arise have been suitably addressed before proceeding. When

Do not immerse unit in water or fluids.

applicable to your areas of operation. Check laboratory procedures

data plate located on the base of this product.

Always follow good laboratory practice when using this

from other equipment.

Do not install or remove any heating apparatus from the controller

implosion or the release of toxic or flammable gases) that might

heating certain substances the liberation of hazardous gases may

Do not install or remove any heating apparatus from the controller

legislative health & safety procedures and all associated legislation

for substances being heated and ensure all hazards (e.g. explosion,

heating certain substances the liberation of hazardous gases may require the

equipment. Give due recognition to your company's safety and

whilst power is applied.

arise have been suitably addressed before proceeding. When

require the use of a fume cupboard or other means of extraction.

whilst power is applied.

applicable to your areas of operation. Check laboratory procedures

Never Operate this equipment with out connection to earth /

implosion or the release of toxic or flammable gases) that might

Do not position the product so that it is difficult to disconnect from

Do not spill substances onto this unit. If spillage does occur,

Always follow good laboratory practice when using this

legislative health & safety procedures and all associated legislation

use of a fume cupboard or other means of extraction.

heating certain substances the liberation of hazardous gases may

for substances being heated and ensure all hazards (e.g. explosion,

ground. Ensure the mains supply voltage is correctly earthed /

arise have been suitably addressed before proceeding. When

the mains supply.

Ensure equipment is used on a clean, dry, non-combustible, solid

disconnect unit from mains supply and follow instructions as

equipment. Give due recognition to your company's safety and

applicable to your areas of operation. Check laboratory procedures

require the use of a fume cupboard or other means of extraction.

implosion or the release of toxic or flammable gases) that might

grounded in accordance with current area legislation.

heating certain substances the liberation of hazardous gases may

work surface with at least 300mm suitable clearance all around

detailed in Section 'Maintenance'.

legislative health & safety procedures and all associated legislation

for substances being heated and ensure all hazards (e.g. explosion,

Ensure equipment is used on a clean, dry, non-combustible, solid work surface

Do not immerse unit in water or fluids.

arise have been suitably addressed before proceeding. When

Always follow good laboratory practice when using this

require the use of a fume cupboard or other means of extraction.

from other equipment.

Ensure equipment is used on a clean, dry, non-combustible, solid

applicable to your areas of operation. Check laboratory procedures

Do not install or remove any heating apparatus from the controller

implosion or the release of toxic or flammable gases) that might

To prevent electronic overheat and potential fire

heating certain substances the liberation of hazardous gases may

with at least 300mm suitable clearance all around from other equipment.

equipment. Give due recognition to your company's safety and

work surface with at least 300mm suitable clearance all around

for substances being heated and ensure all hazards (e.g. explosion,

arise have been suitably addressed before proceeding. When

whilst power is applied.

Ensure equipment is used on a clean, dry, non-combustible, solid

Do not position the product so that it is difficult to disconnect from

Do not cover this product when connected to the mains power

require the use of a fume cupboard or other means of extraction.

legislative health & safety procedures and all associated legislation

Do not spill substances onto this unit. If spillage does occur,

legislative health & safety procedures and all associated legislation

from other equipment.

implosion or the release of toxic or flammable gases) that might

heating certain substances the liberation of hazardous gases may

work surface with at least 300mm suitable clearance all around

the mains supply.

supply.

Do not position the product so that it is difficult to disconnect from the mains

applicable to your areas of operation. Check laboratory procedures

disconnect unit from mains supply and follow instructions as

Ensure equipment is used on a clean, dry, non-combustible, solid

arise have been suitably addressed before proceeding. When

require the use of a fume cupboard or other means of extraction.

from other equipment.

Do not position the product so that it is difficult to disconnect from

for substances being heated and ensure all hazards (e.g. explosion,

detailed in Section 'Maintenance'.

for substances being heated and ensure all hazards (e.g. explosion,

Do not immerse unit in water or fluids.

supply.

It is not recommended to leave any heating apparatus unattended

heating certain substances the liberation of hazardous gases may

work surface with at least 300mm suitable clearance all around

Always follow good laboratory practice when using this

the mains supply.

implosion or the release of toxic or flammable gases) that might

Ensure equipment is used on a clean, dry, non-combustible, solid

implosion or the release of toxic or flammable gases) that might

Do not position the product so that it is difficult to disconnect from

during operation.

require the use of a fume cupboard or other means of extraction.

from other equipment.

To prevent electronic overheat and potential fire

equipment. Give due recognition to your company's safety and

arise have been suitably addressed before proceeding. When

work surface with at least 300mm suitable clearance all around

arise have been suitably addressed before proceeding. When

the mains supply.

Do not immerse unit in water or fluids.

Do not cover this product when connected to the mains power

Do not spill substances onto this unit. If spillage does occur,

legislative health & safety procedures and all associated legislation

Only use Original Equipment manufacture's spares and

Do not position the product so that it is difficult to disconnect from

Ensure equipment is used on a clean, dry, non-combustible, solid

heating certain substances the liberation of hazardous gases may

Do not immerse the controller in water or fluids.

from other equipment.

heating certain substances the liberation of hazardous gases may

supply.

Do not immerse unit in water or fluids.

disconnect unit from mains supply and follow instructions as

applicable to your areas of operation. Check laboratory procedures

accessories. Ref Section 11.

the mains supply.

work surface with at least 300mm suitable clearance all around

require the use of a fume cupboard or other means of extraction.

Do not position the product so that it is difficult to disconnect from

Do not spill substances onto this unit. If spillage does occur,

detailed in Section 'Maintenance'.

for substances being heated and ensure all hazards (e.g. explosion,

from other equipment.

Do not spill substances onto this unit. If spillage does occur, disconnect

It is not recommended to leave any heating apparatus unattended

Do not immerse unit in water or fluids.

Ensure equipment is used on a clean, dry, non-combustible, solid

the mains supply.

Ensure equipment is used on a clean, dry, non-combustible, solid

implosion or the release of toxic or flammable gases) that might

disconnect unit from mains supply and follow instructions as

Do not spill substances onto this unit. If spillage does occur,

during operation.

To prevent electronic overheat and potential fire

unit from mains supply and follow instructions as detailed in Section

Do not position the product so that it is difficult to disconnect from

work surface with at least 300mm suitable clearance all around

detailed in Section 'Maintenance'.

arise have been suitably addressed before proceeding. When

disconnect unit from mains supply and follow instructions as

Do not immerse unit in water or fluids.

Do not cover this product when connected to the mains power

the mains supply.

from other equipment.

Only use Original Equipment manufacture's spares and

'Maintenance'.

heating certain substances the liberation of hazardous gases may

Do not spill substances onto this unit. If spillage does occur,

detailed in Section 'Maintenance'.

supply.

To prevent electronic overheat and potential fire

accessories. Ref Section 11.

require the use of a fume cupboard or other means of extraction.

disconnect unit from mains supply and follow instructions as

Do not immerse unit in water or fluids.

Do not position the product so that it is difficult to disconnect from

Do not cover this product when connected to the mains power

Do not spill substances onto this unit. If spillage does occur,

To prevent electronic overheat and potential fire

It is not recommended to leave any heating apparatus unattended

To prevent electronic overheat and potential fire, do not cover this product

detailed in Section 'Maintenance'.

the mains supply.

supply.

Ensure equipment is used on a clean, dry, non-combustible, solid

disconnect unit from mains supply and follow instructions as

Do not cover this product when connected to the mains power

during operation.

when connected to the mains power supply.

Do not spill substances onto this unit. If spillage does occur,

work surface with at least 300mm suitable clearance all around

To prevent electronic overheat and potential fire

detailed in Section 'Maintenance'.

Do not immerse unit in water or fluids.

supply.

Do not immerse unit in water or fluids.

It is not recommended to leave any heating apparatus unattended

Only use Original Equipment manufacture's spares and

from other equipment.

disconnect unit from mains supply and follow instructions as

Do not cover this product when connected to the mains power

during operation.

To prevent electronic overheat and potential fire

It is not recommended to leave any heating apparatus unattended

accessories. Ref Section 11.

detailed in Section 'Maintenance'.

supply.

Do not position the product so that it is difficult to disconnect from

Do not spill substances onto this unit. If spillage does occur,

Do not cover this product when connected to the mains power

Do not spill substances onto this unit. If spillage does occur,

during operation.

Only use Original Equipment manufacture's spares and

the mains supply.

To prevent electronic overheat and potential fire

It is not recommended to leave any heating apparatus unattended

disconnect unit from mains supply and follow instructions as

supply.

disconnect unit from mains supply and follow instructions as

accessories. Ref Section 11.

Only use Original Equipment manufacture's spares and

Do not cover this product when connected to the mains power

during operation.

detailed in Section 'Maintenance'.

Do not immerse unit in water or fluids.

It is not recommended to leave any heating apparatus unattended

accessories. Ref Section 11.

supply.

Only use Original Equipment manufacture's spares and

during operation.

To prevent electronic overheat and potential fire

M6493 Issue 10.3