ページを印刷する10. CHECK TOP LATCH FOR HOLDBACK AND DEADLOCK.
Adjustment Screw
1. Pushing on push bar will retract the latchbolt and open
the door. Latchbolt will stay retracted and device is in
HOLDBACK. If NO HOLDBACK adjust the screw in top
of retractor by screw driver.
DXAS106
E
3rd Strike Screw
E
Strike Screw
3. Apply third screw in hole of strike once
adjustment is complete.
3rd Strike Screw
DXAS215
E
Close
2. Fully extended latchbolt should be in deadlock.
DEADLOCKED latchbolt cannot be pushed down into
the latch housing. If NO DEADLOCK, loosen strike screws
and adjust strike position.
11. SECURE TWO(2) SIDE SCREWS
Apply second side screws through second holes in
connecting bar with second holes in retractor and tighten
two side screws.
3 8
Open
Connecting Bar
Tighten Four(4)
Side Screws
L
Second
Side
Screws